dansxr2
dansxr2 New Reader
9/24/08 7:59 a.m.

The timing belt slipped and at the moment I'm pulling 70-880 hours weeks with school and work. I have no time not the extra $ to send it to a shop to have the timing reset. The 1.8 is a non interference engine!!! Lots of recent work! Here is the listing on the vw vortex: http://forums.vwvortex.com/zeromodify?cmd=editpost&id=51365637

oldschoolimport
oldschoolimport New Reader
9/24/08 8:10 a.m.

linky no worky

John Brown
John Brown GRM+ Memberand SuperDork
9/24/08 8:28 a.m.

http://forums.vwvortex.com/zerothread?id=4024547

savestheday
savestheday New Reader
9/24/08 8:55 a.m.

Trade?

http://grassrootsmotorsports.com/forum/2008-classifieds/fs-1984-e-prepared-crx-2008/2311/page1/

or

http://grassrootsmotorsports.com/forum/2008-classifieds/fs-87-in-progress-v8-swap-rx7-1900-obo/3248/page1/#post47146

dansxr2
dansxr2 New Reader
9/24/08 11:38 a.m.

I need a DD for now. IE: Civic/Integra, Golf, etc.

fastasleep
fastasleep New Reader
9/24/08 3:36 p.m.

How about a super-nice Volvo 240?

-Les

docwyte
docwyte
10/3/08 3:15 p.m.

The usual reason why the timing belt slips on a G60 is that the crank keyway is stripped. That means a new crank is needed...

Crash
Crash Dork
10/3/08 3:51 p.m.
docwyte wrote: The usual reason why the timing belt slips on a G60 is that the crank keyway is stripped. That means a new crank is needed...

Possibly, but the crank pulley has a tooth that can shear off.

Ask me how I know.

In my case the keyway was fine, just needed a new pulley.

Definitely something to check though.

docwyte
docwyte New Reader
10/3/08 5:55 p.m.

The keyway on my old G60 stripped. Found out at the track in Canada (Quebec) where no one spoke English. That bit.

RXBeetle
RXBeetle New Reader
10/5/08 7:40 p.m.

If someone needs a PG crank (Corrado motor) give me a shout. The timing belt is easy as pie on that motor if you can find the TDC mark through the damn peep hole in the bell housing.

dansxr2
dansxr2 New Reader
10/6/08 6:51 p.m.

confirmed that the keyway is sheared from the pulley. New one on its way and ca ris no longer for sale.

Crash
Crash Dork
10/7/08 1:17 p.m.

Glad to hear you're keeping it after everything you've been through with it. Love that color.

dansxr2
dansxr2 New Reader
10/7/08 3:06 p.m.

Thanks, hopefully good things do come to those who wait! I'm gonna try my best to attend the challenge in '09 maybe will be bringing the '83 928S of my father in Law's he picked up for $1000.

docwyte
docwyte New Reader
10/8/08 8:02 p.m.

That's why you mark the spot on the flywheel with paint.

dansxr2
dansxr2 New Reader
10/8/08 11:17 p.m.

It already is I'm gonna mark the Crankshaft mark and the cam mark with white paint also, My parts should e here later thisweek or early next week.

You'll need to log in to post.

Our Preferred Partners
4ME3aYyQacLSraYHCTNEMiFrq3crDflILo7PhuSt2oQY5eaG1YNB8OaAtX4iGpgX