Parting Out Triumph TR7!

Just tell me what you need and I'll give you a smokin' deal on it.

how are the rocker panels on this thing?

I got to working on mine and found that my rockers were SHOT, i just need a new tub. how much for the whole tub after you get done stripping it out?

I wouldn't mind 2 of those rims either.

1) Where are you (well, where's the car) 2) What size are those rims? (13, 14, 15..)

Carter

I'll have to check out the rockers, but I'm pretty sure they're solid. I also think the wheels are 14", but I'll have to check to be positive. It's not at my house, but I'll check it out on my way home from work tonight, so I'll have some more positive answers then. Oh, and I'm located in Evansville Indiana.

So I stopped by and checked a few things out today, and the rockers are extremely solid. The passenger side looked great and the driver's side had one little spot where the paint was starting to bubble, but I pushed on it and it wasn't spongy or anything. I'll give you a smokin' deal on the shell for sure. I was wrong about the wheels, they're 13"s.

Anyone?

how much for the lot?

$300? I figure a spare trans and rear end is worth that.

those are the two parts that I specifically DON'T need...lol

will you ship to canada.. I need the dash and all the door pannels. Basically the whole inside of the car less the seats and carpet. Oh yea do you have the mirrors. I would need it shipped to L6K 2A1. Keep in mind its for a challenge car

And if the rims were 14 I would take them but its hard to find 13 drag tires

its also hard to find 14 inch TR-7 rims...

IWELDIT wrote: will you ship to canada.. I need the dash and all the door pannels. Basically the whole inside of the car less the seats and carpet. Oh yea do you have the mirrors. I would need it shipped to L6K 2A1. Keep in mind its for a challenge car And if the rims were 14 I would take them but its hard to find 13 drag tires

Yeah, I'd ship to Canada, but a dash might be pricey to ship due to the size. There are no door panels or mirrors, but the dash, console, and the deck behind the seats is still there. I'd say $50 for what ever you need out of the inside, plus shipping.

Oh, and the wheels are 13"s

I need ignition and keys ?

The ignition is there, but I'll have to dig through it to see if there are any keys left.

Thanks I will take it all,Can you price shipping to L6K 6A1 for me ,Oakville Ont Thanks Tom

Do you take pay pal, or do you want a check sent to you Tom AKA tattooedwelder

Yeah, paypal is fine. Let me get all the stuff pulled out and see what size of boxes I'll be dealing with, and I'll get you a shipping price. I probably won't have time to pull all the stuff until the weekend if that's alright.

You all know you want it. I need a MKI Scirocco door and Stan's 325is.

Video Professor said:

Buy my product.

I thought I would move this over to your thread...

I am in Kalamazoo, and I would be willing to deliver your furnace while picking up a TR-7.

what are the dimensions of the furnace, do you want to keep anything off of the TR (I really don't need the trans or the axle), when do you need to have it by, and what is the "reduced price"?

The furnace is 17.5" wide, 40" high, and 30" deep. I'm not 100% sure I'm getting it yet. It's on ebay so anything can happen. It ends in two days so we'll see. If you'd deliver it, I'd give you what's left of the TR7. I've got some more bits of it on ebay, but it's all small stuff.

sweet, let me know how it goes.

Damn, didn't get the furnace.

dang...well, let me know when it is sufficiently stripped of all valubles in your eyes...I don't need the hood, trunk, rubber bumpers, or interior.

(BTW, send me an e-bay invoice, and I will get you your money for the Hot Wheels)

Whoops, I thought I already had. I'll get right on that!