I got stuff. Too much stuff.
Camaro 16x8 in 5x4.75. I got a deal on the board so passing out along at $12.50 each. Two available.
Next we have two free 17x8 in 5x114.3.
Finally we have extra nitrous bottles. Three 10lbs and one 5 lbs. Sorry I need recoup on these so say $90 for the 10 lbs and $80 for the 5? All have guages.
If you have LS top end bits, I am interested in your bits. Gimme your bits.
Rocker arms and associated hardware, injectors (maybe, depending on size,) coils and brackets, etc. I wants your bits.
I have tons of NA6 Miata bits & 1G DSM bits. Lmk if you're looking for anything specific. If anyone happens to have an AWD 1G transmission for sale I'd like to buy one for a spare.
I also have Butler Built aluminum seat with (slightly) padded cover I've decided I'm not going to use, but it's not really Challenge-friendly at $120.
The three 10lb nitrous bottles are spoken for along with the free Mustang wheels pending GRM express from Challenge north to MI area.
In reply to Stampie :
I can transfer if necessary.
I have four 17" C4 Corvette wheels $50, 17" 2004 Cobra 9"/11" staggered wheels with 2 good 315/30r17 Mickey Thompson Street tires $250, 4 18x10+" wheels and 285/35r18 tires $650, Small block center dump headers $50, new in box front sump LS oil pan kit $275, Nitrous parts including bottle, hose, solenoids and nozzle $100.
Which c4 Vette wheels? Also I'll take the nitrous setup off your hands!
Also maybe more info on the 18x10s?
In reply to QuasiMofo (John Brown) :
I'll take the nitrous. 
In reply to QuasiMofo (John Brown) :
That'll work
I should have checked this thread earlier. Anyone else have nitrous they want to part with?
In reply to MrJoshua :
I have that one 5lb bottle left.
Don't know if this will be helpful, I have 6 extra of these lights. Got the set on sale, will sell at-cost for $5 each. Haven't wired one up yet to see how they do but hoping for the best. Came with mounting hardware.
In reply to classicJackets (FS) :
I really don't need those, but at $5/each if you bring them to the Challenge it will be impossible for me to say no for at least 2 of them, possibly more.
Mr_Asa said:If you have LS top end bits, I am interested in your bits. Gimme your bits.
Rocker arms and associated hardware, injectors (maybe, depending on size,) coils and brackets, etc. I wants your bits.
Anyone? I need your bits to make the LS4.9 a reality.
Bueller?
In reply to Mr_Asa :
pm me a list of your needs I think I have some spare rocker stuff
Additional: I have a bunch of extra 10-gage wire, I bought a bunch on eBay. I paid $48.90 for 10, 10' lengths of 10-gauge. Let me know if anyone is interested. I actually bought 2x of this, so I have a ton of wire and don't need a ton of wire.
Cutcliffe is lead on boom gas and C4s.
18x10s are probably staying on DB2.0 for now.
In reply to classicJackets (FS) :
I'm down for 2
I'll take 2 lights as well if not already claimed.
Robbie (Forum Supporter) said:I'll take 2 lights as well if not already claimed.
Assuming Pete is okay with 2, I have 2 for you and that runs me out.
classicJackets (FS) said:Robbie (Forum Supporter) said:I'll take 2 lights as well if not already claimed.
Assuming Pete is okay with 2, I have 2 for you and that runs me out.
Yes, that saves me money.
Could anyone use 13" Hoosier bias plys? They're old, but they've been unmounted, in contractor bags in my attic. I have between 12-20 of them, two widths but I don't recall the widths offhand they're decently wide though, I'd guessimate in the 205-225 range.
I'm bringing 4 of these Pontiac 14x6 wheels, got them for free and will pass them along for the same.
Also have a SBC Bell housing/throw out bearing (and I think clutch fork) that was on a Muncie, $50 would love to get rid of it.
I am in need of a TH400 short shaft. i have a powerglide if anyone is interested in a trade.
You'll need to log in to post.
