YaNi
YaNi New Reader
2/21/09 9:10 a.m.

I am looking for a rust free 1986-1991 Mazda RX-7 hatchback shell with a clean body. I am willing to pay up to about $1200.

I have a rusted out 1990 GTU that I will be using as a donor car, so all I really need is a clean shell. I am willing to travel 8-10 hours from Cleveland, OH, and would be able to pick it up on my Spring Break (March 15-22).

I have been looking for over a year, and all the Northern cars are either too expensive, or rusted out POS'. I check Craigslist and the RX-7 forums regularly, but the sellers can't be bothered to reply.

JFX001
JFX001 HalfDork
2/21/09 9:49 a.m.

I know you said that you check CL, but there are a few here in the Columbus area that might fit the bill.

Good Luck,

John

YaNi
YaNi New Reader
2/21/09 3:01 p.m.

Thanks for the response.

I emailed a couple Columbus area CL ads last weekend and am still waiting for a response.

I've been looking farther and farther south. They are almost giving them away in Georgia and Florida. I've seen a bunch for $5-700.

dyintorace
dyintorace GRM+ Memberand HalfDork
2/21/09 3:10 p.m.

I have a decent shell (complete other than 1 front quarter panel) in my garage (5 lug set up etc but no LSD) that you could have for $350.

ArtOfRuin
ArtOfRuin HalfDork
2/21/09 4:28 p.m.

Have you been checking rx7club.com and rotarycarclub.com classifieds as well?

Also, if you come across one with a blue interior and don't need the interior pieces, would you mind PMing me? Some of the small interior bits in my FC are cracked and I'd rather not pay $30 to Mazdatrix for some piece of plastic.

Osterizer
Osterizer HalfDork
2/21/09 4:52 p.m.
dyintorace wrote: I have a decent shell (complete other than 1 front quarter panel) in my garage (5 lug set up etc but no LSD) that you could have for $350.

Shell found!

It's a quality shell.

dyintorace
dyintorace GRM+ Memberand HalfDork
2/21/09 5:13 p.m.

osterizer should know...he's personally spent time wrenching on it.

Osterizer
Osterizer HalfDork
2/21/09 5:21 p.m.
dyintorace wrote: osterizer should know...he's personally spent time wrenching on it.

If wrenching on a car equated to familiarity, you wouldn't even know that it was in your garage!

SpeedTheory
SpeedTheory GRM+ Memberand New Reader
2/21/09 6:28 p.m.

Dyintorace, any chance you'd tow 'er up to Tallahassee for me? No rig right now, but could use the project.

YaNi
YaNi New Reader
2/21/09 7:11 p.m.
dyintorace wrote: I have a decent shell (complete other than 1 front quarter panel) in my garage (5 lug set up etc but no LSD) that you could have for $350.

Do you have any pictures? I just checked Google maps at its just under 16 hours, which might be a stretch since I'll hopefully be borrowing a friends truck. I'll run it by him tomorrow and see if it's feasible.

ArtOfRuin wrote: Have you been checking rx7club.com and rotarycarclub.com classifieds as well? Also, if you come across one with a blue interior and don't need the interior pieces, would you mind PMing me? Some of the small interior bits in my FC are cracked and I'd rather not pay $30 to Mazdatrix for some piece of plastic.

I have been checking both forums regularly, as well as nopistons. Decent shells go in a few hours, so there's a fair bit of luck involved. The rest are pretty haggard looking or are asking far more than they're worth. I know of an S4 in the local Pull-A-Part, and I think it has a blue interior. I briefly looked at it in December and it had a full interior. What pieces are you looking for?

HoserRacing
HoserRacing New Reader
2/21/09 9:49 p.m.

http://www.streetcarforums.com/showthread.php?t=87244

Let me know if you're interested.

S2
S2 New Reader
2/23/09 7:42 p.m.

I've got one that has some minor nose damage, and will be missing the hood to replace that on another car. (Ask Dyintorace ) Otherwise I think it is pretty straight. No engine, four lug roller, but I'll give it to you for what Jensenman gave it to me for- $100 in Charleston, SC. Has all of it's glass, but no sunroof. I'd rather it go back out into the wild instead of the junkyard.

dyintorace
dyintorace GRM+ Memberand HalfDork
2/23/09 7:49 p.m.
S2 wrote: I've got one that has some minor nose damage, and will be missing the hood to replace that on another car. (Ask Dyintorace )

I have no idea what you're talking about.

dyintorace
dyintorace GRM+ Memberand HalfDork
2/23/09 7:51 p.m.
YaNi wrote:
dyintorace wrote: I have a decent shell (complete other than 1 front quarter panel) in my garage (5 lug set up etc but no LSD) that you could have for $350.
Do you have any pictures? I just checked Google maps at its just under 16 hours, which might be a stretch since I'll hopefully be borrowing a friends truck. I'll run it by him tomorrow and see if it's feasible.

Here you go:

You'll need to log in to post.

Our Preferred Partners
9plmYqqmGkzYAobnLsOStOZ9jkAIfYSa8B9cNUF2XfzIDMaHMWgNytvIvVeFY93c