56 Willys Rat/Hot Rod Project

Mine, unfortunately. Trying to down-size and scale back on projects, would like for this to find a new home.

The basics - 56 Body, 83 S10 Chassis. Front end has new tubular uppers, drop spindles, and drop springs. Needs rear suspension, body mounts, etc.

Here's the build thread: http://grassrootsmotorsports.com/forum/build-projects-and-project-cars/1956-willys-pickup-hot-rod-rat-rod-autoxtrack-day-/58244/page1/

Engine/Trans not included. Currently a roller on the stock S10 rear. Have the title for the S10. Bill of Sale for the Willys.

Looks pretty much like this at the moment:

This is what I was going for:

Located in Fredericksburg, VA. $1000

so its a roller... needing a motor and a trans and what not...I need to look at the build thread and ill get back to you asap

did I miss it..is the steering and all that hooked up?

is the s10 rear end bolted in? I saw something about a ford 8.8 in there...

slightly worried about the bill of sale only on the body though

If I didn't need to clear things out myself I'd be very interested in this, love the concept, I think there's potential here.

Is the original frame long gone?

So yeah, plan was to put an 8.8 under the back (which is in the photos) but we're keeping the 8.8 for another project. S10 7.5 is just sitting under the frame (with big zip ties holding it in place) to make it a roller. Plan was for a truck arm rear but that's where we left off on the project.

Steering is all hooked up except for the column. Have both the S10 column and the Willys Column.

Plan was to get an abandoned vehicle title (easy in VA) for the Willys Body but there are several other routes you can take as well for something from the 50's.

Logdog - original frame is long gone, sorry.

Bump before it goes up on CL

Bump. $750 to get this out of the garage. Roller on s10 wheels/axle.

Do you still have the doors and front fenders?

Wally wrote: Do you still have the doors and front fenders?

Yes.

Bump