i cleaned out a deceased HVAC contractor's shop yesterday and have some full new and some partial 30lb tanks of refrigerant. also have some other refrigerants, lots of tools including but not limited to manifold/gauge sets, vacuum pump, uv leak detection kit, and a bunch of other stuff i don't remember as i was overwhelmed with the amount of stuff. we filled 2 vans, a trailer, and need to go back next week for the rest.
i'd like to see if someone wanted to make a fair offer on all the HVAC equipment and refrigerant prior to piecing it all out. if anybody is interested we will be working on getting a proper inventory this weekend as we clean out our vans. i'm not looking for top dollar from a GRM guy if you can use for your business or to start something new. plus it's easier to sell in a lot versus piece by piece.
everything located in 44280
Just in case you didn't know, R-22 is going the way of R-12 went in cost. Way up.
If you do break it up or if there is more than one, I might be interested in a vacuum pump if the price is right. As a home brewer, I end up doing some refrigeration work!
spitfirebill wrote:
Just in case you didn't know, R-22 is going the way of R-12 went in cost. Way up.
i saw that online. 410 going for $75, r22 going for 300+. there is one r12 cylinder as well i believe, and maybe some other types. i'd rather not sit on them and wait for them to double, space is more important than max $.
If you get to parting out I need an empty 30lb tank and a set of gauges. Just don't know how bad shipping to Jacksonville FL would be.
Unless I'm really behind I'll need them before. I want to drain my ac so that I can remove the compressor at least.
What refrigerant to you have? I need to see if i have the correct fittings and gauges
Starting to get into the black hole that is my van. So far i have a full 410a, 2 full sealed 410b, and have not really got further than that. I have 3 empty r22 tanks. They seem like they could be good for something like a moon style gasser front mount fuel and tank with a little modifying.
sealed R500 30lb tank too.
tools: Ridgid systemsafe fluorescent leak detector kit, excellent shape with 2 new tubes of dye $100
robinair high vacuum pump $100
monarch fuel pump test kit $50
bacharach monoxor CO tester $50
have more, still getting through the van, have more to pick up this week.
How much to ship the vacuum pump to 28152? I'll take it pending logistics
probably in the $20 range, maybe more but i can eat a little overage. i have one thing on it to check out, want to make sure the inlet fitting isn't boogered up. it runs perfect.
that is great, send me your paypal or however you want to handle it.
I'm r134a so looks like maybe you don't have that anyway.
SVreX
MegaDork
9/29/15 4:17 p.m.
I would consider an offer on the entire lot, if you want to get me an inventory.
SVreX wrote:
I would consider an offer on the entire lot, if you want to get me an inventory.
I will do that with pics, the only thing being the vacuum pump which as you can see above is pending. There are a few more tools, and i have a scale on the way for the unsealed cylinders too see what has been used. Email me if you have not, i could send pictures to your phone or email.
Stampie wrote:
I'm r134a so looks like maybe you don't have that anyway.
No empties. I have one 134a cylinder that I didn't mention because im keeping it for myself.
If you sent a message, I didn't get it or don't know where to look. Don't want to leave you hanging.
TiggerWelder wrote:
If you sent a message, I didn't get it or don't know where to look. Don't want to leave you hanging.
not yet, don't want to leave you hanging either. i had a nasty ladder fall today at work so i'm a bit out of it right now. my head bounced off the floor pretty hard and my whole left side is pain.
