Cheap GM Supercharger

3.8L Chev blower

Not mine.

$50 though

DAMN!
challenge this, people. it needs to be at the challenge.

its a series 1 m62, you can get series 2 m90's for $100 all day.

i am tempted to pick up a m90 and rebuild the s2 3800 i have broken here and drop in something but dont feel like doing wiring beyond plug and play.

I kindof need that.... but i'd have to assume it needs a rebuild.

Ben, I've got an M90 in pieces I picked up a few years ago & then discovered it needed rebuilt. I'll make you a killer deal if you're interested, but I'm not going to mess with shipping it.

petegossett wrote: Ben, I've got an M90 in pieces I picked up a few years ago & then discovered it needed rebuilt. I'll make you a killer deal if you're interested, but I'm not going to mess with shipping it.

I would be interested, but it's too big for anything i'm messing with, unfortunately. (Unless someone could tell me if it would work to twin-charge a 2.2 that only revs to 6000rpms?)

I appreciate the offer, though!

Those sell for like $300 even at pick and pull now.

92CelicaHalfTrac wrote:

petegossett wrote: Ben, I've got an M90 in pieces I picked up a few years ago & then discovered it needed rebuilt. I'll make you a killer deal if you're interested, but I'm not going to mess with shipping it.

I would be interested, but it's too big for anything i'm messing with, unfortunately. (Unless someone could tell me if it would work to twin-charge a 2.2 that only revs to 6000rpms?) I appreciate the offer, though!

Yep, it would work great for twin-charging since you could probably use it to spin a damned Holset! Ha! 90ci dumping into the inlet of a large turbo could work pretty well. I recently bought an Eaton M62 from a Mercedes off of Craigslist for $100, so the deals are out there if you look hard enough.

turboswede wrote:

92CelicaHalfTrac wrote:

petegossett wrote: Ben, I've got an M90 in pieces I picked up a few years ago & then discovered it needed rebuilt. I'll make you a killer deal if you're interested, but I'm not going to mess with shipping it.

I would be interested, but it's too big for anything i'm messing with, unfortunately. (Unless someone could tell me if it would work to twin-charge a 2.2 that only revs to 6000rpms?) I appreciate the offer, though!

Yep, it would work great for twin-charging since you could probably use it to spin a damned Holset! Ha! 90ci dumping into the inlet of a large turbo could work pretty well. I recently bought an Eaton M62 from a Mercedes off of Craigslist for $100, so the deals are out there if you look hard enough.

Well, the motor will spin a Holset on it's own due to weird exhaust flow design, but i don't think it's really big enough to properly spin an M90.

I emailed the guy...

he had this to say....

DONT KNOW THE MILAGE, ROTORS SEEM OK , NOT BEAT UP, DID NOT SEE THE CAR IT CAME OFF OF