DukeOfUndersteer's Race Parts Extravaganza!

Everything must go go go!!

Got a whole list of crate LS1/LS3 parts, springs, Miata motors, dry sump tanks. Will update if more becomes available.

LS1 Long Block. Comes with ARE dry sump pan. Replacement motor for blown motor at Sebring. Pulled for an LS3. $2,500 + shipping

MSD Atomic 90mm Throttle Body. Off an LS1. Used in two seasons of Trans Am. Sold to Gasoline

Stock LS3 Cam. Pulled out for spec cam to go in. Brand New! - $150 + shipping

Hoosier rain tires. 205/50 15s. Brand new set Been sitting in the warehouse, need to make room. DOT Legal - $50/tire, $200/set

Brand new LS1/LS3 intake manifolds. Never used. Asking $60, + shipping PN # 12589181 LS1 pictured.

LS3 pictured, does not include fuel rail or throttle body, unless you add more $... Two sold, one to Gasoline, one jstancel

Pro-Comp tach, used for 1 season in Trans Am. Sold to Javelin

Aeromotive Fuel Pump and Filter. Used for one season. Sold to Javelin

Accusump Dry Sump Tank. Believe it's a -12 AN fitting. 4 and 5 gallon available. Excludes mounting brackets. $75 + shipping Believe this is the "5 Gallon" Sump

Three different Spec Miata motors available. All are 1.8s, one ran the "25 Hours of Thunder Hill". Asking $2,000 each. Can play with pricing if serious. Motor 1

Motor 2 (25 Hour Motor)

Third motor isn't pictured, will get pics and more info an all 3.

Hypercoil springs, pair. 400lbs, 8 inch. - Sold to Pat

Eibach springs, pair. 850lbs, 6 inch. - $15 + shipping

Eibach springs, pair. 375lbs, 8 inch, 2.5 ID - Sold to 93EXCivic

Eibach/Ohlins springs, pair. H200-065-0375. No idea what rate they are, 8 inch, 2.5 ID - Sold to yamaha

Eibach springs - pair. 500 lbs, 7 inch, 2.5 ID - Sold to Swank Force One

Eibach springs, pair. 800 lbs, 6 inch, 2.5 ID - Sold to alstevens

E39/E46 MAF. Purchased for my car, wrong one. No good to me as electronic items are non-returnable. $50 PN# 1 432 356

Brand new LS3 Oil Pans. Never used. One sold to Gasoline, one to bluej with Windage tray and oil pick-up

Knock Sensors. 5 available. $10 + shipping

Brand new LS3 Corvette Water Pumps. $200 each + shipping

Brand new LS3 Throttle Bodies. Electric, not cable. $50 + shipping

All prices are negotiable, all located in Arlington Texas.

Hmm, very interested in the tach and fuel pump...

What are the specs on the fuel pump? Max gph @ psi & max psi please.

In reply to Giant Purple Snorklewacker and Javelin:

I'll find out info tomorrow. Walking out the office...

In reply to DukeOfUndersteer:

I'm interested in a tachometer/fuel pump bundle. Let me know tomorrow...

I see there are a few people ahead of me, but if you have another one, I'll take the fuel pump/filter.

In reply to Slippery:

If you need the pump I'll stand aside. I use a pump that looks exactly like that (but cost $175) so... was looking for a cheap spare.

I still want the tach.

Giant Purple Snorklewacker wrote: In reply to Slippery: If you need the pump I'll stand aside. I use a pump that looks exactly like that (but cost $175) so... was looking for a cheap spare. I still want the tach.

I was going to try and use it as a transfer on my e36 ... But like I said, Jav and you have first dibs on it. Duke might have a few of these :D Thanks!

Are there more than one type (part number) of ls3 pan? Interested in picking up 1-2. Are the windage/pickups available? Shipping would be to 20009 or 20910.

For E36 M3s and giggles, what would shipping on one of the manifolds look like?

I need the LS3 intake if it is not already spoken for...

Sending you a PM on the tach.

if for some reason everyone else falls through I'm interested in the tach.

By "Spec Miata" engines, do you mean they were built to the extent(to exploit? ) the rules? Or are these stock?

If everyone else flakes on the Tach and Fuel pump I'm in for both. Drop me a PM if for some reason everyone ahead of me turns into a complete idiot.

If any one needs shipping to the challenge I can help

I heard there was a tach for sale around here

As of right now, Javelin has dibs on the tach and fp. Waiting for the boss to come in and give me more info.

I am interested in spring dimensions / /pictures / rates.

The plan would be to use them on my 2nd gen RX7.

Thanks,

Rob R.

Updated, new items.

I may be interested in the 400lb Hypercoil springs if someone will confirm to me that this is the correct length I would want to use on a coilover setup on my Shelby Charger.

I would like to get in line for the LS1 intake, a LS3 intake and a LS3 Pan.

DukeOfUndersteer wrote: As of right now, Javelin has dibs on the tach and fp. Waiting for the boss to come in and give me more info.

Just need the specs on the fuel pump!

Shipping quote to 98626 as well.

I believe it's a "A750" pump. Flows 450lbs an hour, 45psi. Damn, I'm selling this super cheap!

In reply to DukeOfUndersteer:

I'll take em both! Total price with ground shipping to 98626 and where do I send the cash?

To GPS, Slippery, mazdadeuce, moparman, hobiercr, and logdog: