TE04H turbo, needs rebuild

I bought this for a project that never got going. Time to make some room.

The turbo is an oil and water cooled Mitsubishi TE04H with an internal wastegate.

Here's the good and the bad: There is a small crack in the turbine side near the center section. The exhaust elbow is included but one of the bolts is broken off. There is a bunch of radial shaft play and a little axial play, definetely needs a rebuild. The fins look like they kissed the wall of the compressor but appear to be okay. They aren't bent or broken. There is a 90 degree hardpipe for the oil drain and a couple inch brass pipe with an elbow for the water included.

Okay, so that was mostly just bad, but the turbo does look like a good core for rebuilding. I'm asking $30 OBO and will ship at buyers expense. I'm located in Columbus, GA about 90 miles south of Atlanta and I'll meet within a reasonable distance (or unreasonable if you live somewhere interesting and are paying for gas!!)

$25 OBO, I want this gone.

FYI that's a stock piece for 89-92 or so turbo 2.5L fwd chryslers. In working condition itll move enough air to make 200-220 hp in perfect conditions.

I hope someone takes it and it doesnt end up scrap, but i have to say good luck getting money for it. Bump

Thanks for the info Vigo!

I'd give it to someone who'd use it before letting it go for scrap. Not that giving it away is my first choice.

$15 OBO! The wastegate actuator is worth almost that!

Hmm are you close to I 75?

I'm just under two hours west of I-75. Pretty much a straight shot west from Warner Robins.