JohnyHachi6
JohnyHachi6 New Reader
2/23/11 8:09 a.m.

Looking for a few (2 to 4) 460cc rx-7 fuel injectors. They must be of the high impedance variety. Here's the specs (they came in both the S4 and S5 FC's):

S4: 87-88 NA RX-7 w/VIN of or after 7601 (last 4 digits) = 460cc high impedance. Black body, purple top. Serial # - 195500-1350

S5: 89-91 NA Rx-7, 460cc injectors, red top. Serial # - 195500-2010.

The serial #'s are stamped into the colored plastic lip right above the metal body (pretty small numbers). If you have the S4 injectors I would like the harness pigtails with them. Let me know if you have any of these that you're willing to part with. For reference we just bought a set of 4 for ~$45 shipped and aren't looking to spend a lot more than that.

wvumtnbkr
wvumtnbkr GRM+ Memberand Reader
2/23/11 8:32 a.m.

IIRC the 460cc injectors are for the NA cars.

The S5 injectors are going to have an "oval" connector ( I assume this is why you would like the connectors with the S4 ones).

YOu can get the S4 connectors off marrin fuel injection brand new with about 8 inch leads on them.

I may have some, I will check. They would need checked out and cleaned.

Rob

JohnyHachi6
JohnyHachi6 New Reader
2/23/11 10:03 a.m.

Yep, NA cars. We have a home-built rig for cleaning and flow testing injectors so that would be fine (actually, the reason we need these is because 2 that we recently tested were not flowing well).

You'll need to log in to post.

Our Preferred Partners
zLfo6jrtF692jcYWg4DP5eIAFsjZemzxqckDYnelqmEJG8DZF5La90HbolIBpxY1