chevy, p71, vehicles, everything else sale

Need to replenish car funds.

Ask me about any small block chevy needs. I have almost anything laying around. Getting rid of it all. Including buf not limited to:

Complete 350

3970010 block

Aftermarket and factory intakes

Distributors

Headers

Roller cam accessories

Tins

Accessory drives including serpentine

BBC:

1992 454 with all accessories minus tbi unit 129k ran fine when i pulled throttle body $500

P71:

Code 3 push bar $100

Aluminum Console with keyboard mount $40

Dash mount for tablet pc $30

Transmissions/driveline

Aluminum powerglide with converter $250

BOP long th400(has water in pan, core) Free

Saginaw 3 speed(same, got wet) Free

Lsx/4l60e stock torque converters $10 each

4L80e 1992 works good 2wd $300

Np241c transfer case(beefy mfer) 31 spline input for nv4500/4l80/th400 use $100

Wheels and tires:

2005 avalanche 17" $150/4 with nitto dura grappler

1994 s10 15" aluminum $50/4

1998 s10 aluminum $50/4

Vehicles:

MacNasty 1985 S10 roller from FL $300

1995 ranger flatbed 4 cyl 5 speed 99k miles new back tires, many newer parts, great little runner. Think clutch slave needs replaced, clutch good but hydraulics wonky at times $600

1990 c1500 2wd shortbed 454/5speed from TX. Tons of new parts $2017

2007 chevy express 3500 6.0 LQ4 cargo van. Engine/trans donor. Salvage certificate. I bought it wrecked(deer) and rebuilt it so i could verify driveline. Runs and shifts perfectly, has electrical drain and death wobble at 50mph. Great challenge donor. 320k miles no idea on rebuilds but it runs awesome. Not legal to drive on road but it's possible, i drove it for 6 months on plates from the van i used as the body parts donor. $1500

Other:

EJ22 good runner with stainless headers, harness, pcm, extra intake $300

VW karmamm ghia fiberglass 1 pc front end needs work but never installed $200

1983 Yamaha 225dx three wheeler, running riding project, i use around yard. $350

1982 yamaha xv920 virago project. Partially disassembled. Homemade intake with single harley mikuni tm50 carb. Ran great but i burned up the starter while tuning the carb. Didn't know the starters were a weak point on these. $400

There will be more, getting ready to storm the ebay with lots of rare bits to build the car fundback up

Everything located 44280 or 44256, my house or my dad's.

More:

Ls truck oil pan/pickup $20

Ls truck exhaust manifolds $30/pr

95+ astro front bumper cover $free

94+ bravada front bumper cover $free

39-40 chevy pickup hood with sides $200

22" venti chrome hideous wheels 5x5 $100

70-81 camaro left rear quarter panel patch $15

73-87 chevy gmc meyer power angle plow with e47 pump $100

Later model(can get part numbers) exploder front rancho lift kit(adjustable struts with springs and mounts) new $100

Truck cap for shortbed ranger mid 90's $100 payable to stampie

But wait there will be more..... serious, I have too many parts. We're just beginning to scratch the surface

Curse you. I think my car fund is about to go to you.

I wonder if I could combine your flatbed Ranger and my terminally rusty Ranger into one decent truck. If I could make a way to get it home...

BlueInGreen44 wrote: I wonder if I could combine your flatbed Ranger and my terminally rusty Ranger into one decent truck. If I could make a way to get it home...

If necessary i can bring it here to my house and you could use my tools to fix it. A complete master/line/slave assembly is in the $130's from rock auto. The truck belongs to my dad, but since my mom got a new caravan she gave her astro to him so the ranger is the odd truck out.

Damn I want that 454 truck! But I've got no money in my car fund either.

How come my neighbors never have yard sales like this? And that Ranger cap can be discounted.

Because your neighbors are not car part hoarders?

Ls truck a/c bracket with tensioner $35

Without $15

Mk1 golf aftermarket fender flares $100

CE rear framerails for ladder bar suspension $150

Sm465 hydraulic bellhousing $100

XS turbo stainless sbc twinturbo headers $100

Stainless towing mirrors(oe for 90 3500 gm) $30

Rx express commercial floor and upholstery cleaning machine $100

Suzuki alt125 3/4 wheeler rear axle

Box of lt1 injectors $5

Sbc tall cast aluminum valve covers $25

8.5 10 bolt gov lock diff

Mark iv big block chevy passenger car oil pan $40

Clamp on helpers for leaf springs 2.5 wide. Application is s10/ranger $35

Kobalt full size truck tool box aluminum 1yr old $100

C6 z51 front rotors 3 miles (surface rust needs sanded) $50

49 plymouth rear fender left super solid $100

Old huffy 26" adult trike(needs repair) $50

99-04 super duty/excursion power stop ceramic front pads $20

95+ astro/safari wiper motor almost new $20

67-72 chevy gmc pickup power brake booster mount/linkage $50

Belltech drop spindles 88-98 chevy(used) $100

67-72 gm a body factory front disc brake setup spindles to calipers $250

Th350 chrome pan $10

8.5 10 bolt chrome covers new with drain plugs $20 ea

Are those MK1 fender flares, or full flared fenders?

You've got mail.

I'm now saving my pennies for that pushbar and the tablet mount.

Good luck with the sales, don't hold anything for me, but I might be calling once I can get a few bills scraped together.

SVreX wrote: Are those MK1 fender flares, or full flared fenders?

Skinny Flares. The ones that people claim are relatively universal for any compact import. Bought them for the last wrx to cover rot but the car was crap so it's gone and the flares are in the rafters

Any chance you have a picture of the ranger?

I'm going over there Tuesday i'll take a bunch

patgizz wrote: 1990 c1500 2wd shortbed 454/5speed from TX. Tons of new parts $2017

This alone make me want to purge some of my fleet for funds.

Shocked that C1500 is still around, saw it a posted for sale a few months back and wanted it then.

patgizz wrote:

BlueInGreen44 wrote: I wonder if I could combine your flatbed Ranger and my terminally rusty Ranger into one decent truck. If I could make a way to get it home...

If necessary i can bring it here to my house and you could use my tools to fix it. A complete master/line/slave assembly is in the $130's from rock auto. The truck belongs to my dad, but since my mom got a new caravan she gave her astro to him so the ranger is the odd truck out.

I was thinking I could take a detour when we drive through Cleveland area on the way back to MI from Watkins Glen on Memorial Day. It's a long shot though and my wife is suggesting that I have enough projects this summer already. She's probably right...

what headers are for sale?

If the C1500 was closer to MA I'd be all over it.

I SO want that 1500, but...that whole money thing

Bobzilla wrote: what headers are for sale?

Have a slightly used(engine break in only) set of hedman long tubes for your truck and a set of stainless blockhuggers in the SBC department. Shortly a used set of 67-72 a body as well

Oooh.... I want those long tubes but I think the wife might kill me.

They've been in the attic at my dad's forever. I had them on a 90 suburban, ran it in, didn't love it so pulled the motor and gave the truck to my dad who put stock manifolds on it

Interested in the big block truck, but can't find the old ad. Can you link it so I can check out the pics and other details?