Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
7/2/18 9:53 a.m.

Everything is located down on the MS Coast(or “up” for the FL & TX people)  

Pair of C5 17” wagon wheels $50

 

Poly C4 front control arm bushings + ball joint boots. $45 for all 

 

C4 a/c bypass pulley, installed but removed before the Challenge: $20

 

Random C4 interior parts(from Ovid_and_Flem’s 88). I only have a pic of the rear hatch trim, but I know there’s a center console & stack, as well as other misc parts. Free picked up, or for the cost of packing/shipping. 

 

I have other misc crap in boxes, so if you need something I can check. 

roadsportusa
roadsportusa New Reader
7/2/18 6:12 p.m.

do you have a steering rack?

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
7/2/18 7:02 p.m.

In reply to roadsportusa :

No, sorry. 

GTXVette
GTXVette SuperDork
7/3/18 6:06 a.m.

started saying ooh ooh, I NEED A WHOLE INTERIOR, but it's a parts car so do not buy stuff. but I do have an extra rack,  hope you don't mind  Pete.

Crazier
Crazier New Reader
8/21/18 9:15 a.m.

Still have the bushings or brackets?

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
8/21/18 2:46 p.m.

In reply to Crazier :

I still have everything except the wheels. What brackets do you need?

Crazier
Crazier New Reader
8/21/18 5:26 p.m.

AC and smog delete, I'd rather reroute the belt, but I haven't found a reasonable way yet.

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
8/21/18 7:12 p.m.

In reply to Crazier :

I have the pulley & bracket pictured above that’s sold as an a/c-delete pulley. However, I used in place of the air pump - but only temporarily. I decided the budget hit wasn’t worth it as there’s minimal weight or HP difference by keeping the stock pump. 

$50 + shipping & I’ll toss the bushings, ball joint boots & bypass pulley into a box & send them your way. 

Crazier
Crazier New Reader
8/22/18 7:04 a.m.

I will almost certainly take it in a couple weeks when I get paid again. AC compressor has to go,and I am sure all of my bushings are junk may as well replace the ones I can on the cheap.

 

How did you use it on the smog pump? I may have to chase down a second one.

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
8/26/18 4:10 p.m.

In reply to Crazier :

I just used the stock mounting bracket, though details are a bit fuzzy now. It didn’t take any fabrication though. 

Wxdude10 - Mike
Wxdude10 - Mike Reader
8/26/18 6:56 p.m.

Pete,

Are the interior pieces from the 84-89 years?   If so, I’d be interested in them.  Let me know what the cost is to ship to 01824.  Thanks!

-Mike

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
8/26/18 7:47 p.m.

In reply to Wxdude10 - Mike :

Correct. Most of them were from Ovid_and_Flem’s 88. 

Let me figure out how to get them packed & i’ll check on shipping. Might take a couple days. 

Wxdude10 - Mike
Wxdude10 - Mike Reader
8/26/18 11:32 p.m.

No rush.  Thanks!  We are going to need a bunch of interior trim for our 84.  

You'll need to log in to post.

Our Preferred Partners
9F9JcOW3w9tbPcCjBL7dVge85Ke67uQD6ZtuIj9iir3CWALpeLc1czkn5yizFbFz