https://www.racetechmag.com/2017/08/willem-toet-explains-motorsport-diffusers/
We have discussed this in a few of the threads here. That article does a good job of not over-complicating the operation and process.
Thanx, didn't know it had been posted before.
That particular article has not been posted before, to my knowledge. I was speaking of similar discussions on the operations of diffusers. We covered most of what the article covers regarding the basic features and design.
You'll need to log in to post.
VSM's 635csi
Streetable track tire test: Hoosier TrackAttack Pro
Too good to be true? Custom-built coil-overs at off-the-shelf prices
How my view from the driver's seat has changed over the years
Maximize the performance of a C7 Chevrolet Corvette
How to run the 24 Hours of Lemons with as little effort as possible
Bridgestone Potenza Race: Equally adept on track and on the street?
Want to go endurance racing? It's now easier than ever to compete.
How to increase downforce using CFD | Against the wind: Part 1
Make your project car faster: Advice from a Formula SAE team
A week with a Lucid Air: Better than a Tesla?