Presented by Nine Lives Racing
z31maniac
z31maniac PowerDork
10/2/12 4:32 p.m.

I'm curious about ordering a front air dam, but want to know how much clearance I'm losing between the bottom of stock bumper/fascia and where the bottom of air dam ends up?

Over the winter I want to add an air dam and build a splitter that attaches to it and goes back to at least the subframe.

No class rules to follow, only for HPDE/my own personal enjoyment.

I'm currently looking at the one Flyin' Miata sells, any other suggestions? I do NOT like the look of 949Racing piece.

car39
car39 HalfDork
10/2/12 4:50 p.m.

1990 Stock Miata piece 1995 TougeRun splitter from Flyin Miata

Splitter seems to work better, definately looks more aggresive

z31maniac
z31maniac PowerDork
10/2/12 5:38 p.m.

FM sells a splitter? I'm talking about the front air dam.

http://flyinmiata.com/index.php?deptid=4544&parentid=0&stocknumber=29-77550%20%201990-97

And asking how much lower it sits to the ground vs the bottom of the stock bumper.

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
10/2/12 7:24 p.m.

I just happen to have both the factory airdam and the Touge Run one in Miatas in my own garage. So I checked.

Since the air dam covers more than just the lowest point of the bumper, it's difficult to get an exact difference as I have no Miatas here with unmodified front bumpers. So I measured from the bottom of the air dam to the center of the groove in the bumper. The Touge Run is 13.25" below that groove all the way around.

The factory one is more sculpted on the bottom, but in the middle of the nose it's 12.5" below. So it's 3/4" higher than the Touge Run one at the lowest point.

I can vouch for the ability of these to deform. I have actually folded mine right under the car when it got caught on a trailer ramp when I was loading and running at track height. It popped right back out. I was also, umm, testing and took a very aggressive entry into a gravel cut with a drop. The air dam hit hard and threw gravel everywhere. It pulled a few of the fasteners out, but I just replaced them and you can not tell now.

I've abused the factory unit somewhat as well over the years, but nowhere near as badly as it's never been on cars that see quite as much abuse...

FM does not sell a splitter, but I have made one for the Targa Miata as well as a belly pan that goes to the skid plate underneath. All three parts can be removed separately. Easy enough. Tip: rivnuts.

z31maniac
z31maniac PowerDork
10/2/12 7:55 p.m.

^I bet people would buy a kit of the air dam + splitter, just sayin'!

Thanks for the info. My car doesn't have a factory air dam? Just the bumper cover.

Duke
Duke PowerDork
10/2/12 8:32 p.m.

Yeah, I could use one. My car is sloppy underneath. It just has a R-package double chin, and with all the claptrap behind the snout, it ain't pretty from below.

DWNSHFT
DWNSHFT HalfDork
10/2/12 9:09 p.m.
Keith Tanner wrote:

Whose 928 in the background and what's the story behind it?

David

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
10/2/12 10:28 p.m.

z31, my particular splitter only works if you have my particular skid plate, which only works if you have a V8. So the market may be smaller than you think

The 928 belongs to Eric, one of the mechanics at FM. No story, it's just his cool car. He usually drives a WRX, but the 928 shows up once every week or two when he feels like driving it. Other occasional cool cars that show up are a BMW 2002 and some of my toys, like the M5 or the MGB. There are surprisingly few people who drive Miatas to work at FM and nobody who owns one as an only car.

z31maniac
z31maniac PowerDork
10/3/12 7:16 a.m.
Keith Tanner wrote: z31, my particular splitter only works if you have my particular skid plate, which only works if you have a V8. So the market may be smaller than you think

Maybe design one for the raft of guys that still have 4 cylinders?

I'll probably just buy some decently thick ABS plastic over the winter and attach it to the airdam.

Thanks for the measurements!

You'll need to log in to post.

Our Preferred Partners
aK5bc7aNKywSgnvi9JLV1wEppy9jsiVMo36sBDLfhtNmd8N02HlLhU7KJiQ8SgFu