1 2 3
Ben_Modified
Ben_Modified Reader
12/15/16 4:14 p.m.

I am helping/mentoring my neighbor with his first engine swap.

YouTube Video

\20161215_104129\\" />

NOHOME
NOHOME PowerDork
12/15/16 5:33 p.m.

Your neighbor favours the deep end of the pool does he? Or is the LSx swap into the 510 a blazed trail that I am not aware of?

Fitzauto
Fitzauto Dork
12/15/16 5:47 p.m.

Im very excited for this.

chandlerGTi
chandlerGTi UberDork
12/15/16 5:54 p.m.
NOHOME wrote: Your neighbor favours the deep end of the pool does he? Or is the LSx swap into the 510 a blazed trail that I am not aware of?

It is not.

TheV8Kid
TheV8Kid Reader
12/16/16 11:45 a.m.

This should be awesome. I have always liked these cars, and turbos are fun. I will be watching this one.

Rufledt
Rufledt UltraDork
12/16/16 11:59 a.m.

This is awesome. That is all.

LifeIsStout
LifeIsStout GRM+ Memberand New Reader
12/16/16 1:49 p.m.

Very cool, and what is that motorcycle contraption at the end of the video?

Ben_Modified
Ben_Modified Reader
12/16/16 2:12 p.m.

That is a highway legal Human Electric Hybrid motorcycle. Based on an 81 Honda GL500. The pedals keep a normal bicycle cadence up to about 70 mph. The sensation is similar to walking on a moving walkway. Great work out. Pedaling is optional. The Build from start to finish is here:

Build Videos

ccrunner
ccrunner New Reader
12/16/16 2:14 p.m.

I wish you were my neighbor

Rufledt
Rufledt UltraDork
12/16/16 2:18 p.m.

found a pic to describe how i feel

Indy-Guy
Indy-Guy Dork
12/16/16 7:49 p.m.

Your neighbor is a very lucky guy.

bentwrench
bentwrench Dork
12/17/16 10:27 a.m.

He will need a parachute to catch the diff pin and spider gears when they shoot out of the rear axle!

Ben_Modified
Ben_Modified Reader
12/18/16 1:36 p.m.
ccrunner wrote: I wish you were my neighbor
Rufledt wrote: found a pic to describe how i feel
Indy-Guy wrote: Your neighbor is a very lucky guy.

Don't be so sure, I'm that noisy neighbor with the crappy lawn!

Ben_Modified
Ben_Modified Reader
12/18/16 1:37 p.m.
bentwrench wrote: He will need a parachute to catch the diff pin and spider gears when they shoot out of the rear axle!

No problem, narrowed 8.8 Ford with welded axle tubes going in.

ssswitch
ssswitch Dork
12/18/16 11:51 p.m.
Ben_Modified wrote: Don't be so sure, I'm that noisy neighbor with the crappy lawn!

Yeah, but it sounds like you at least bring out that competitive spirit in your neighbours. Mine just stare angrily.

minivan_racer
minivan_racer UltraDork
12/19/16 5:30 a.m.
Ben_Modified wrote:
ccrunner wrote: I wish you were my neighbor
Rufledt wrote: found a pic to describe how i feel
Indy-Guy wrote: Your neighbor is a very lucky guy.
Don't be so sure, I'm that noisy neighbor with the crappy lawn!

Then we'd get along great. My wife may hate you, but that'd be because every time she complained of how bad our yard was I'd say "at least it isn't as bad as next door."

Ben_Modified
Ben_Modified Reader
1/19/17 6:30 p.m.

Spent a couple of hours on my neighbors car today. We got the engine in place with the front crossmember and engine bolted in.

<img src="20170119_141638_resized" />

The big 4L80 trans fits well also

<img src="20170119_141646_resized" />

Project Videos

Rufledt
Rufledt UberDork
1/19/17 7:49 p.m.
minivan_racer wrote:
Ben_Modified wrote:
ccrunner wrote: I wish you were my neighbor
Rufledt wrote: found a pic to describe how i feel
Indy-Guy wrote: Your neighbor is a very lucky guy.
Don't be so sure, I'm that noisy neighbor with the crappy lawn!
Then we'd get along great. My wife may hate you, but that'd be because every time she complained of how bad our yard was I'd say "at least it isn't as bad as next door."

i'm with this guy. if you are loud and have a messy yard, it would take some of the heat off of me!

Ben_Modified
Ben_Modified Reader
1/25/17 3:19 a.m.

The aftermarket front crossmember fits the car perfectly, but not the oil pan on the ls engine. We had to move one of the rack mounts over for clearance.

<img src="20170124_161324" />

bentwrench
bentwrench Dork
1/25/17 6:41 a.m.

"The big 4L80 trans fits well also"

After a lot of the firewall and all of the trans tunnel disappeared.

A cage and subframe reinforcement will be needed to keep the windshield from popping out @ 200HP and so the doors will still open and close after the first hit!

Looks like fun!

Ben_Modified
Ben_Modified Reader
1/25/17 6:19 p.m.
bentwrench wrote: "The big 4L80 trans fits well also" After a lot of the firewall and all of the trans tunnel disappeared. A cage and subframe reinforcement will be needed to keep the windshield from popping out @ 200HP and so the doors will still open and close after the first hit! Looks like fun!

All true. Most of the tunnel will get reused and yes a full cage is going in along with reinforcements under the front fenders where the rockers tie in

Ben_Modified
Ben_Modified Reader
2/24/17 6:08 p.m.
Ben_Modified
Ben_Modified Reader
4/10/17 5:29 p.m.

Worked with my neighbor on his turbo LS Datsun 510 wagon today. It is really coming together.

<img src="20170410_141707_resized" /> <img src="20170410_160817_resized" />

BenModified.com

ssswitch
ssswitch Dork
4/10/17 5:54 p.m.

I'm almost afraid to ask what's going to happen to the rest of the car, once the engine can no longer hold your interest.

Ben_Modified
Ben_Modified Reader
4/10/17 6:14 p.m.
ssswitch wrote: I'm almost afraid to ask what's going to happen to the rest of the car, once the engine can no longer hold your interest.

full cage and an 8.8 ford rear end

1 2 3

You'll need to log in to post.

Our Preferred Partners
9W17MDaTODXlnifeDxgeqeItbSzcK5mWaTY3RLRDev2wSFrAOfLCUhMu4ijMHDNX