Driver side fender
Fenders and lights are looking good, the cutouts in the fenders could look good if they follow the contours of the taillight opening, but they might get very close to your tires.
Not digging the front grille surround/lip though, I think the car looks better without it. I'd be tempted to try a simple sheet plastic cover over the depressed area under the radiator opening and attaching the mesh inside the opening somewhere. I think the mesh will pop out at higher speeds if you try to stick it in with sealant, you definitely want some proper mechanical retention using small bolts or hidden zip ties - auto manufacturers tend to use plastic clips for holding mesh in.
GameboyRMH said:Fenders and lights are looking good, the cutouts in the fenders could look good if they follow the contours of the taillight opening, but they might get very close to your tires.
Not digging the front grille surround/lip though, I think the car looks better without it. I'd be tempted to try a simple sheet plastic cover over the depressed area under the radiator opening and attaching the mesh inside the opening somewhere. I think the mesh will pop out at higher speeds if you try to stick it in with sealant, you definitely want some proper mechanical retention using small bolts or hidden zip ties - auto manufacturers tend to use plastic clips for holding mesh in.
Thanks for the comment. There were many that shared your concerns and suggested mechanical connection. I will see what I can come up with.
Matching fiberglass molds and doing some electrical testing.
https://youtu.be/vROlbjjjGq0
GameboyRMH said:Great work on the taillight shape, looks like they could've been that way from the factory!
Thanks Friend!
First part from fiberglass mold
https://youtu.be/_paJKVsR-_I
Stripping down to solve those pesky electrical problem
https://youtu.be/KUeK_37Cck8
I joined my first fiberglass piece
https://youtu.be/n7kv04dl-o8
Homemade DIY Widebody Fender is Mounted
https://youtu.be/b5V7C77fb_4
Homemade DIY Widebody Complete!
https://youtu.be/_xd8YgW1nM0
Installing 5 point racing harness
https://youtu.be/lwsDryFS6wI
Charging Circuit is Working!
https://youtu.be/J4LSbphxMeI
On the Road Again!
https://youtu.be/edmmytvjusA
Time for some panel fitting
https://youtu.be/IExhT8lmQ1o
Meeting with JerryRigEverything
https://youtu.be/asQ3Erxl6gE
Working on windshield wipers
https://youtu.be/p9Fm8BPYt3E
Working on the rear diffuser. Also starting the cost challenge.
https://youtu.be/fDRwKZMtO2c
You'll need to log in to post.