my 1984 Alfa Romeo spider

I have the exhaust collector tubing contours correct now, now to cut the steel and weld all the parts together , 1.825 tubing

Making the mounts/ stencil for the new exhaust collector tubing 

The two post will help me keep the c-t-c spacing correct 

Now to slowly trim the exhaust tubing to blend together 

Love the step by step process for the exhaust.

Helps people like me get a bit more insight.

Tack welded and added a extension. Still need to trim and merge the lower pipes together 

Interesting day, while working on my spider exhaust,I had these 2 'experts' walk up to me and start telling me how to do the job I was working on, they both told me they were mgb experts, so I decided to mess with these 2 Arab experts, so I started quizzing them on my "MGB 🤣🤣🤣' after a while I told them it was a alfa romeo, not a MGB, but they kept insisting that they were MGB experts and my car was a British car, so I found my DMV paperwork and opened the driver's door to show them it was a alfa Romeo,made in Italy,.. then they started to double talk and make up excuses. I told them to piss off, all these experts, wow

At least they didn't try to explain to you how Alfa Romeo stole the MGB blueprints because that was OBVIOUSLY an MGB, engine and all 

Spacers between the disk and the face of the hub,2mm, will not affect the parking brake . The button Allen screws were rubbing on the brake backing plate

Kinda rat rod, looking now, but it will have new paint next spring. But the brakes are finished, I have new front rotors at home. These are just the old ones, for test fitting 

take 3 on the collector below the header.mot much room to work with, engine,body shell, steering system, so this time much slower on the cuts,and trim to, fit slow,and a lot of tape

Third time is the charm.