1 ... 3 4 5 6
CyberEric
CyberEric Dork
9/2/23 5:56 p.m.

How am I just seeing this?! I owned a Festiva for years. Bone stock. I absolutely loved it! Except the captured front rotor design, but you did away with that. It was fun stock, I can't even imagine with the mods you've made. 

chiquito1228
chiquito1228 Reader
9/23/23 12:06 a.m.

Sneak peek for next year. I have 2 more events left for this season and motor is coming out

TurboFource
TurboFource HalfDork
9/23/23 7:20 a.m.

Looking forward to this!

chiquito1228
chiquito1228 Reader
9/27/23 5:21 p.m.

Another successful autocross event at Rockford speedway. Again not too much pictures had my older son with me and we just were caught up in the moment.The layout was really tight and technical but man this were the festiva shines. Been small and underpowered worked on my favor

chiquito1228
chiquito1228 Reader
9/27/23 5:24 p.m.

TurboFource
TurboFource HalfDork
9/27/23 6:50 p.m.

Nicely done!

chiquito1228
chiquito1228 Reader
10/27/23 8:30 p.m.

Header comparison . Intake flange arrived so time to cut and weld also new cams and solid lifters

jimbob_racing
jimbob_racing SuperDork
10/27/23 8:49 p.m.

I cannot believe that I haven't seen this before. Terrific!

BlueInGreen - Jon
BlueInGreen - Jon UberDork
10/27/23 10:23 p.m.
chiquito1228 said:

 

Road race Festiva lined up between a bugeye WRX and a Mazdaspeed6 with a Neon coupe hiding in the background. Lots of cool stuff in one picture laugh

TurboFource
TurboFource HalfDork
10/28/23 6:39 a.m.

Looking forward to new engine build!

chiquito1228
chiquito1228 Reader
10/28/23 11:42 p.m.
TurboFource said:

Looking forward to new engine build!

Once I finish the intake manifold, the motor would be going to the machine shop. 

chiquito1228
chiquito1228 Reader
12/1/23 9:29 p.m.

Well intake manifold and new tri-y header is done. Block is in the machine shop. Got all the parts to build the short block and I would be dropping that off 1st thing tomorrow morning.

TurboFource
TurboFource HalfDork
12/1/23 9:46 p.m.

Looking for award to you getting this in your Festiva!

chiquito1228
chiquito1228 Reader
12/1/23 10:02 p.m.

Pistons,rods arp main studs and boundary engineering oil pump

TurboFource
TurboFource HalfDork
12/2/23 7:38 a.m.

Carillo pistons? 

chiquito1228
chiquito1228 Reader
12/2/23 2:23 p.m.

In reply to TurboFource :

Supertech 

clutchsmoke
clutchsmoke UberDork
12/22/23 8:08 a.m.

Real cool build and you're local! Hope to catch you at an event in 2024.

TurboFource
TurboFource HalfDork
2/24/24 4:48 p.m.

Looking forward to updates on this.....

chiquito1228
chiquito1228 Reader
4/20/24 1:24 a.m.

In reply to clutchsmoke :

Definitely. What club you with or what track you usually run?

chiquito1228
chiquito1228 Reader
4/20/24 12:29 p.m.

I had to machine flat the intake flanges. Short block and head are completely assembled. Decided to clean the wiring and do a simple wire tuck. 

chiquito1228
chiquito1228 Reader
4/20/24 12:30 p.m.

TurboFource
TurboFource Dork
4/20/24 6:47 p.m.

Looks great!

chiquito1228
chiquito1228 Reader
5/18/24 11:13 p.m.

Everything is done. From new cold air intake to the mild wire tuck. Putting a few miles on the current tune to make sure I have no leaks. And hopefully hit the Dyno for a tune and numbers

TurboFource
TurboFource Dork
5/19/24 7:11 a.m.

That looks nice and clean!

chiquito1228
chiquito1228 Reader
7/3/24 6:44 p.m.

So far I have put 900 miles and hpde/hsax event. Motor seems to be happy. No Dyno numbers but hopefully by the end of the month. I was also able to knock almost 3 seconds off of my pb at BHF and I know I didn't become a better driver over night. 

1 ... 3 4 5 6

You'll need to log in to post.

Our Preferred Partners
4BRGOYNgoLyy7a26oIOrBYL3ULoekwDvLp1ku0QhaJQEaXRmXR4ocX2Z8dhcO0Rx