1 ... 6 7 8 9
Patrick (Forum Supporter)
Patrick (Forum Supporter) GRM+ Memberand MegaDork
10/10/20 8:02 p.m.

In reply to untchabl :

You're not the first, i asked when he sent me the pictures this morning laugh

 

I don't need it, but i also have a vh45de and manual trans sitting here, but i also don't need it.  

untchabl
untchabl Reader
10/10/20 8:02 p.m.

In reply to Stampie (FS) :

Think it over and let me know if you want to sell and how much you would want for it. Did you get a salvage title for it or is it no title?

untchabl
untchabl Reader
10/10/20 8:04 p.m.

In reply to Patrick (Forum Supporter) :

I don't "need" it either but I'm always looking for another project.

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/10/20 8:16 p.m.

It has a good FL rebuilt title on it.  I bought it from pimpm3 knowing it was a questionable engine.  I also know he gave me a deal and I'd pass that deal on.  I also know he gave me a deal and I could have a lot of fun with it with more work.  Whatever I think I have ~$700 in real world money in it.  

Pete Gossett (Forum Supporter)
Pete Gossett (Forum Supporter) GRM+ Memberand MegaDork
10/11/20 5:01 a.m.
Patrick (Forum Supporter) said:

I don't need it, but i also have a vh45de and manual trans sitting here, but i also don't need it.  

Please make this happen, even if you're not the one to do it. 

OHSCrifle
OHSCrifle GRM+ Memberand SuperDork
10/11/20 7:15 a.m.

Photos like this really make me wonder if ALL engines known for sludge are purely caused by neglect.

I would not be able to walk away - would have to flush that mess with kerosene and  see what happens on fresh oil. 

SVreX (Forum Supporter)
SVreX (Forum Supporter) MegaDork
10/11/20 8:19 a.m.

I'm down for a couple stickers. 
 

Sorry to hear about the Z

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/11/20 8:51 a.m.

In reply to SVreX (Forum Supporter) :

PM me your address and I'll get them out.

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/12/20 1:00 p.m.

All stickers have been mailed.  If you requested some and don't get them it's probably my fault.  Just let me know and I'll send some.

stylngle2003
stylngle2003 GRM+ Memberand Reader
10/12/20 1:01 p.m.

fill it with diesel and atf, crank a few times and see what comes out?

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/12/20 1:13 p.m.

In reply to stylngle2003 :

The only way I'd run this engine and hope for it to last would be to pull it tear it down clean it and put it back together.  I'd rather just put in a junkyard engine or buy a copart donor.  If the sludge is that bad behind the timing cover there's a E36 M3 load I'm not seeing without a tear down.

Robbie (Forum Supporter)
Robbie (Forum Supporter) MegaDork
10/12/20 1:24 p.m.

Yeah, i'd say that motor is junk. I'm guessing the trans and diff are probably not far behind. If the fluid in the other two checks out, then I'd just throw a junkyard vq at it. 

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/12/20 1:48 p.m.

In reply to untchabl :

I think Travis has dibs from before when he and I were talking about using it as a manual donor.  I really don't know what I'm going to do with it but if I let it go I'll put you on the list.

surfshibby07
surfshibby07 Reader
10/12/20 2:24 p.m.

Can always be original and go LS. lol

I kind of want to see you tear it all down.  Just how bad is it in there???

It would be quite the epic phoenix-rising-from-the-ashes moment for this engine to run again.

Though the car is still a complete piece of E36 M3.  So choose your counsel wisely.

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/12/20 2:40 p.m.

In reply to TVR Scott (Forum Supporter) :

I always thought you were a sadomasochist type.  But yeah it would be kinda cool to see the train wreck that engine is.

maschinenbau (I live here)
maschinenbau (I live here) GRM+ Memberand SuperDork
10/12/20 2:41 p.m.

I appreciate it Stampie, but realistically I don't see myself manual-swapping Datsaniti before it leaves my life. It would be a cool project for the next owner though.

Mr_Asa
Mr_Asa SuperDork
10/12/20 2:52 p.m.

I wonder if you could find an Inline six that would fit and make the 350Z Nissan should have

surfshibby07
surfshibby07 Reader
10/12/20 3:14 p.m.

In reply to Mr_Asa :

now were talking

slowbird
slowbird SuperDork
10/12/20 4:29 p.m.
Mr_Asa said:

I wonder if you could find an Inline six that would fit and make the 350Z Nissan should have

Ford 300 will fit in an RX-8 (kinda) so it'll fit in a 350Z, I imagine. I mean, maybe. I mean, it's a terrible idea and there's a hundred better engine choices for this car, but you could find one almost anywhere and it will run forever.

Mr_Asa
Mr_Asa SuperDork
10/12/20 4:35 p.m.

In reply to slowbird :

Stampie, I've got one on a stand.  It was making some ugly noises last time it was running, but she was running.  If you're interested I can pull the pan and check bearings.  Might've been a lifter, though.

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/12/20 4:41 p.m.
slowbird said:
Mr_Asa said:

I wonder if you could find an Inline six that would fit and make the 350Z Nissan should have

Ford 300 will fit in an RX-8 (kinda) so it'll fit in a 350Z, 

I love this logic.  You need to move down here so you can be the official Team Stampie VP of Ideas.

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/27/20 8:03 a.m.

I gave my number to someone during concours that was interested in buying the 350z. I already suck at putting names with faces and mask really mess that up more. Anyway contact me before I deal with the great mass of idiots on CL. 

surfshibby07
surfshibby07 HalfDork
10/27/20 8:32 a.m.

In reply to Stampie (FS) :

is that car a 6 speed? If yes, text me what you want for it. because id challenge the ish out of that car in the future. 

Stampie (FS)
Stampie (FS) GRM+ Memberand MegaDork
10/28/20 5:15 p.m.
Stampie (FS) said:

I gave my number to someone during concours that was interested in buying the 350z. I already suck at putting names with faces and mask really mess that up more. Anyway contact me before I deal with the great mass of idiots on CL. 

Ok this is last call.  If they don't contact me by 7pm tomorrow I'll sell it to surfshibby07.

1 ... 6 7 8 9

You'll need to log in to post.

Our Preferred Partners
ZAi2JA9qLXLWp79b4ydLnnFHa6pQ6o0OZx0apwxDY1A8jiicSTmqkhOKKRHpovR7