2wd 2002 S10 extended cab

I don't have pictures right now (buried in a shed but I should have some this weekend) but is there any interest in a manual transmission 4-cylinder 2wd S10 with the third door? It was my daily driver until a few years ago when the slow leak in the radiator turned into a big one and I overheated the engine badly enough that water poured in the radiator came out the tailpipe. 

Nearly rust free, just a few dings and such, and I have a ton of parts I gathered up to swap in a 4.8l truck motor with a 5-speed from a v-6 S10 including an extra engine wiring harness,  tilt column, 4wd blazer disc brake rear end, C5 Corvette wagon wheels and spacers, and a ton more.  I have an older 2.2 with a slightly different intake and head or your choice of probably half a dozen 4.3s or a rebuilt goodwrench 2.8L available with the truck as well.

I also have a tow bar that comes with if you want and with the driveshaft disconnected it flat tows very well so you won't even need a trailer to get it home behind the family minivan. I'm willing to meet anywhere within 600 miles of 57223 for $0.50 a mile on a Saturday. 

Looking for $800 as it sits with just a complete truck needing an engine and radiator but your best deal would include a lot of the extra parts for ridiculously low prices. Low as in everything you would need except maybe a radiator and exhaust for a 4.8L 5-speed challenge S10 including the headers, mounts, clutch, 4 wheel disc, corvette 17/18" wheels, programmed ecm, and delivery for enough under budget to be able to finish with minimal creativity. 

I don't have the time myself, but if you can follow one of the best documented swaps around an have a few tools and some free weekends this summer you could drive this in from anywhere and be reasonably competitive. 

oh my gosh. do want. what color is it?

It's that color:

Also,  if it makes a difference to anyone, I just remembered that I have a 4wd S10 frame that should fit under this body that was disassembled and powder coated black.  If someone wants it and all the parts that I got to put it back together, most also powder coated, I will throw it all in free with the truck.

I would also take either a Camaro or Mustang T56 in trade, or maybe even a truck 2wd NV5600 for behind the 440 in my truck or Tremec 3260 from the 4-cylinder Cadillac ATS or Camaro for an Opel project. Actually, pretty much any configuration of running LTG engine (ATS, CTS, Malibu, Regal, Envision, Camaro, Equinox, Traverse,  etc) and I will even bring cash to the party to make it happen if you know of or can find a wrecked donor car.

I like the idea of this far too much, but I already have both of my vehicles in various states of sketchiness and disrepair sadly. Unless you’re interested in a 2000 blazer or an e36 lol