stan
stan GRM+ Memberand UltraDork
11/12/22 2:45 p.m.

 Always thought these looked nice, but didn't care for "big" cars. This fact that it has a 5-speed makes me look/want though.  Thoughts on these??

 

https://www.facebook.com/marketplace/item/1198234827708003/

Mr_Asa
Mr_Asa UltimaDork
11/12/22 3:28 p.m.

Someone here was looking for one.  yupididit, maybe?

68TR250
68TR250 HalfDork
11/12/22 6:41 p.m.

The manual LS were V6.  The V8s were auto.  I looked at them when they were new and considered one.

yupididit
yupididit UltimaDork
11/12/22 9:33 p.m.

In reply to Mr_Asa :

Nope, Pops had an auto v8. A manual v6 seems boring tbh

Mr_Asa
Mr_Asa UltimaDork
11/12/22 10:05 p.m.

In reply to yupididit :

Damn.  Not knowing who it was is gonna bother me, now

secretariata (Forum Supporter)
secretariata (Forum Supporter) GRM+ Memberand UltraDork
11/12/22 10:21 p.m.

Isn't that transmission desirable for some rwd conversion? I think I remember one of our no longer active members talking about it. I know his real first name, but can't remember his user name. He was in Columbia SC & had an LS powered E36

John Welsh
John Welsh Mod Squad
11/13/22 3:21 a.m.

Asking $1500 makes this pretty reasonable! 

Needs a trans pull for clutch/input so there is some work to be done. That work is cost prohibitive if you have to pay a shop for it but if DIY, it's probably pretty cheap. Same with window regulators. 

Only one picture. I'd want to see the other side of the car for damage as well as a driver's seat shot for condition of interior..  I'd want to know tire condition too since if needed, that's an easy $800 expense! 

Patrick
Patrick GRM+ Memberand MegaDork
11/13/22 10:42 a.m.

They had me until input shaft noise. 

dean1484
dean1484 GRM+ Memberand MegaDork
11/14/22 8:18 a.m.

I was hot for one of these as a basis for a FC rx7 motor and trans swap years ago. 

gumby
gumby GRM+ Memberand Dork
11/14/22 9:18 a.m.

I was a Ford tech when these were new and loved the idea of one with three pedals. Only about 2000 units produced. Saw, and drove, my first manual version just three years ago....

They haven't aged well in general, and the one I drove in particular. Broken plastics, rotten thru the rear wheel wells into the door jambs, etc. The engine was uninspiring, the trans was numb. I left that test drive with shattered rose colored glasses, and ended up with a first gen SHO instead.

Input shaft noise could be a simple as a throwout bearing, but who knows. At $1500, if it isn't ate up with rust, it would be a cool car to have for a minute but it's not a unicorn I lust after anymore.

chandler
chandler UltimaDork
11/14/22 9:32 a.m.

I was all over one until the one I went to look at had the wheel well rust Gumby described. Looked fine til you opened the rear door and you could see through to the tire. What caused that?

You'll need to log in to post.

Our Preferred Partners
9xSlUEvQJHLbseTxiw3SEPvhXufg6eykNLz2Hmolzf7d5tpimc4bCQxll40uLScQ