1 2
RossD
RossD SuperDork
10/14/11 9:53 a.m.

In reply to Ranger50:

My dad's '10 Charger R/T Hemi AWD w/Road&Track Package works pretty good. You can get a good 4 feet of rear wheel rubber laid down before the front wheels kick in. Ask me how I know

Back on topic: There should be a lot of ways to get a manual behind a LSx with an AWD transfer case but it's going to shift like a truck, because thats where the manual transmission will come from.

Heres the link to Novak Adapters: http://www.novak-adapt.com/knowledge/gm_generation_III_v8.htm

Derick Freese
Derick Freese Dork
10/14/11 12:48 p.m.

I'd go with Jeep parts. An AX15 and an NV242 transfer case are a junk Cherokee away.

stuart in mn
stuart in mn SuperDork
10/14/11 12:51 p.m.

Summit Performance had a '32 Ford street rod built some years ago that was four wheel drive. It had a Corvette engine and manual transmission mated with the transfer case from an Astro van. Do a google search on 'quadradeuce' and a bunch of information pops up.

MrJoshua
MrJoshua SuperDork
10/14/11 1:00 p.m.
Derick Freese wrote: I'd go with Jeep parts. An AX15 and an NV242 transfer case are a junk Cherokee away.

Interesting. Would that handle the torque of a mild LS build in a heavy vehicle?

1 2

You'll need to log in to post.

Our Preferred Partners
vXOiEr9Vdg0pEhPh54ccVzhLlxpctAj5qlsqaPEaGMyCGoJ8DE5mTI1bkNIkTXuE