Here are height measurements. To fender opening it is 35.5 inches and from the center of the hub to fender is 21.5 inches. Trying to find stock measurements to see height.
Here are height measurements. To fender opening it is 35.5 inches and from the center of the hub to fender is 21.5 inches. Trying to find stock measurements to see height.
Ok I measured rocker height and it is 22 inches to the ground, stock is 14 inches. I have 31 inch tires that measure to 30.5 inches and the stock tires measure 26 inches so that gives me 3.5 inches of suspension lift.
There is clearly an adapter plate and with the block numbers it looks like it is a 97 1.6 block with what I assume is a 1.3 head. It has a plastic timing cover as well.
Here are some pics of the engine bay.
The 1.6 block reduces your upward suspension travel in the front, make sure you have extended bump stops so that the travel ends safely.
BTW if you want to get rid of that mechanical fan, an '06 CRV AC condenser fan goes in like it was meant to fit there.
In reply to GameboyRMH:
with how stiff the suspension is i doubt i will have a problem
I finally got the locking hitchpin off playing a game of twister with the sawzall, It needs new winch cable but it works otherwise. I also got the back hardtop to lock and cleaned out all of the mouse homes in the vents, above the heater core. I do love that the official aftermarket fix to clean out above the heater core is to drill a 1.5" hole in the plastic above the heater core and then cover it with a rubber grommet or tape.
You'll need to log in to post.
