On my steering arms to rid bumpsteer,i have 3 spacers and on the other side I have 2 spacers,( outer link, drag link, outer link system) I have a not too sure feeling on driving like thid8, so do I replace the 3/4inch stack of spacers with a solid with a 3/4spacer? 
2nd photo is not the finished bumpsteer fix. Just a starting point, and to give you folks an idea how my steering system is set up.
But have no fear, I bought very long bolts so all the spacers I will need, will be on the shank of the bolt. Not the threads. After I finish the finel settiings ,i will remove the bolts,and cut any excess threaded part of the bolt. Grade 8 5/8 bolts and grade 8 nylocks.
I used tube that has the ID of my bolts and cut exact spacers from it.
Can the arms be swapped side to side to reduce the length of the bolt?
You'll need to log in to post.
