cars with 15" 4x100 wheels?

I scored a good deal on some snow tires for my wife's scion xA. I'm looking for a spare set of wheels to mount the snows on. I need some 15" 4x100's with a FWD offset. I know some late model civics, miatas, corollas, and scions came with this combo but the junk yards seem to think everything from those cars is made of gold. Does anyone know of any other cars that I can look to get these wheels from? I don't care if they are alloy or steel.

thanks a lot!

BMW E30s Miata Civic early sentra too I think

oh my mazda2 has that size :)

also, saturn SC/SL2s

Protoge, Escort, ZX2, some Rx7's

Look for MINI wheels. I bet your local Craig's will scare up a bunch. Upgrading MINI rims are a very common.

-Rob

Later VWs (2000-up IIRC) have them. Almost universally alloys, though.

Good luck finding a set but 92 Geo Storm GSI had 15 inch alloys in 4x100 bolt pattern and took 205x50x15 tires

thanks a lot everyone... I'm craigslisting this stuff now.

keep 'em coming if you think of any others.

Congrats, you've found the most common wheel size ever. You have about a 50/50 chance that any given wheel on Craigslist is a 4x100. About half of those will be of the 15" variety.

No rx7's were 4x100. Also vw's 98 and earlier were 4x100 (golfs and jettas non vr6). Integras were that bolt pattern.

Tire Rack is listing 14" winter packages for xAs.

'92-'93 Storm GSi/Impulse XS/Stylus XS/RS 15x6 40mm offset 56.5mm hub.

DOHC Sx2 Saturns 15x6 50mm offset 57mm hub.

BMW E30 325ix 15x7 57mm hub.
BMW E30 14x6 35mm offset 57mm hub
BMW 325is/es 14x6.5

Honda/MINI hub is 56.1 mm.
Integra GS-R 15x6

Various '95-'02 Miata (M) 15x6 40/45mm offset 54mm hub.

The standard base model wheels on all these are 14".

You do have to watch the hub size - the Miata ones are pretty small, so it can be hard to fit Miata wheels on a lot of other cars.

I think there was a first generation RX7 with that pattern - GSL-SE? Not that it's liable to be a factor.

Sentra thru at least B14. Was B15 the switch to 4x114.3?

Keith Tanner wrote: You do have to watch the hub size - the Miata ones are pretty small, so it can be hard to fit Miata wheels on a lot of other cars. I think there was a first generation RX7 with that pattern - GSL-SE? Not that it's liable to be a factor.

the GSLSE were 4x114.3 the non GSLSE were 4x100

and yeah I had to buy hubcentric rings to fit E30 wheels on my mazda2

ValuePack wrote: Sentra thru at least B14. Was B15 the switch to 4x114.3?

Yes because I remember having SE-R Vspec wheels on my old s13 way back in the day.

Look for late 90s early 2000 Civic wheels. I bought a set a few years ago and they fit my All-Trac perfectly.... they came with Hakapelittas

http://forums.beyond.ca/showthread/t-117406.html

A bit long but...

fidelity101 wrote: the GSLSE were 4x114.3 the non GSLSE were 4x100

Nope. Gslse was 4x114.3, but all other first gens were 4x110mm.

Your scion uses a 54.1mm hub bore which is the smallest available, so as long as you don't mind being non hub centric, your hubs will fit in the bore of whatever wheels you buy. If you do want Hubcentric, stick with wheels from Mazda, ford, and Toyota.

One other thing to remember is brake clearance. Try one on to make sure the calipers don't hit the back side of the wheel. You can always run spacers, but it's nicer no to have to.

We've got an FB rear end in the shop that I'm sure is a 4x100. I'll have to check it out.

As far as I know all usdm rx7 rears were either 4x110/114.3

Yes, all FBs are 4x110 or 4x114.3.

rob_lewis wrote: Look for MINI wheels. I bet your local Craig's will scare up a bunch. Upgrading MINI rims are a very common. -Rob

What is the offset on the MINI wheels? I am also looking for 15" for the Civic since the tire supply for 14" wheels sucks....

According to logdog, there are no 15" wheels with a 4X100 pattern. He kept trying to push 16's, 4X110's and motorcycle wheels when I was asking him to find some for me.

93EXCivic wrote:

rob_lewis wrote: Look for MINI wheels. I bet your local Craig's will scare up a bunch. Upgrading MINI rims are a very common. -Rob

What is the offset on the MINI wheels? I am also looking for 15" for the Civic since the tire supply for 14" wheels sucks....

45mm offset for the 15's. 5.5" width. should fit fine on a civic. you will have to get some conical shaped lugs as the civic uses rounded/ball style lugs.

Baloney. The 88-91 BMW E30 325iX AWD coupes and sedans used a 15X7 4X100 BMW/BBS Euroweave with a 41 mm offset and a 57.1 hub center. Lots of the E30 boys are using these with 15 mm adaptors in lieu of the expensive 15X7 Euroweaves. Great wheels, light and strong. Occasionally you'll run across a 325iX with steelies in the same offsets in a junkyard, but most were up-optioned with the BBS wheels. Craigslist Seattle and the PNW and you'll find some.

DrBoost wrote: According to logdog, there are no 15" wheels with a 4X100 pattern. He kept trying to push 16's, 4X110's and motorcycle wheels when I was asking him to find some for me.

There are many guides like this on the internet.
http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?LugCount=5&StudSpreadInch=4.75&StudSpreadMM
http://www.performancewheeladapters.com/servlet/the-template/guide/Page
Be mindful of bolt size and center bore.

In your case, Miata 15" rims and Mazda MX3 15" rims should be perfect fits if you are willing to go alloy.
Escort ZX2, '97 and newer are the proper center bore too.

Base model Chevy Cobalt steel rims will work but you should get hub spacers to fill the center bore gap (the Cobalt has a larger hole.)

Irish1 wrote: Baloney. The 88-91 BMW E30 325iX AWD coupes and sedans used a 15X7 4X100 BMW/BBS Euroweave with a 41 mm offset and a 57.1 hub center. Lots of the E30 boys are using these with 15 mm adaptors in lieu of the expensive 15X7 Euroweaves. Great wheels, light and strong. Occasionally you'll run across a 325iX with steelies in the same offsets in a junkyard, but most were up-optioned with the BBS wheels. Craigslist Seattle and the PNW and you'll find some.

DrBoost wrote: According to logdog, there are no 15" wheels with a 4X100 pattern. He kept trying to push 16's, 4X110's and motorcycle wheels when I was asking him to find some for me.

He'll read this and realize how wrong he was. Thanks.