ebonyandivory
ebonyandivory PowerDork
2/7/20 1:51 p.m.

Trying to find consensus on whether or not lockers, limited slips, spools and mini-spools are interchangeable.

Im seeing spools for the 8.5 but nothing for the 8.625 specifically.

Gearheadotaku
Gearheadotaku GRM+ Memberand UltimaDork
2/7/20 3:18 p.m.

Do you mean 7.5 and 7.625? They basically interchange, watch the spline count.

8.5 is a different animal. Never heard of a 8.625

Gearheadotaku
Gearheadotaku GRM+ Memberand UltimaDork
2/7/20 3:21 p.m.

Do you man 7.5 and 7.625? They basically interchange, watch the spline count.

8.5 is a different animal. Never heard of a 8.625

81cpcamaro
81cpcamaro Dork
2/7/20 3:35 p.m.

The 8.625" is usually referred to as 8.6"

At this   Site   they have good info on them, looks like the differentials do interchange, just have to match the spline count on the axles and also the differential bearings too.

BionicTigerShark
BionicTigerShark New Reader
2/7/20 3:51 p.m.

8.625 was in trucks like 99 up I think 

https://www.randysworldwide.com/product/yp-fsgm8-5-30/

Looks like they interchange if you have the right axle spline count. 

I did look into putting a 8.6 carrier in my 2nd gen camaro 8.5 to get the 30 spline axles, there's something about needing different bearings though.

ebonyandivory
ebonyandivory PowerDork
2/7/20 3:54 p.m.

Yes, pre-'99 was 8.5" ring gear. '99 and up 4.8 and 5.3 had 8.6(25)" ring gear while the 6.0 got 9.25?ring gear

You'll need to log in to post.

Our Preferred Partners
sIwLSjHwIk5JagBiIuSh4wAocyH7kabx8kzbsogsyZPpseGdg1sVDmpIEEEbsdSe