Going for the gusto this year with the last chance challenger / parking lot build...

What size and length do you need ?

A 24 inch with -4 female on both ends.

In reply to pimpm3:

I have a tubing bender if you want to borrow it

Sorry I have 2 24" -3 lines and a 18 -6.

No worries the local performance shop has what i need for $16.00.

I might take you up on the bender, are you coming to the challenge?

In reply to pimpm3:

Planning to. I am in Jax which I think you are from the challenge last year

In reply to Andy Neuman:

I'll definitely take you up on that offer. I've had some unexpected recent expenses that made the challenge seem almost out of reach. I still have to cancel the hotel room and commute from home again, but I'll make it.

In reply to Derick Freese:

I'm attending solo this year. I have a room with two beds. You can have the other!
You are too critical to the build!

In reply to JohnRW1621:

I'll definitely take you up on that!

Okay. Youre in.

I offered to someone else too but the hotel has roll away beds also which could accommodate a 3rd.
Either way, you're covered.

In reply to JohnRW1621:

I'd take the floor if push came to shove. It keeps me from driving over an hour in each direction every day.

Is there a list of things you plan to accomplish in the parking lot?

We need a 1/16" npt nut or two and some loctite, and someone should bring jb weld

With the fuel supply jeremy is picking up local to him and bottle+brackets, we should have complete nitrous system less an arming switch and a push button. I dont think this system necessitates a WOT and window switches. Someone can bring wire to hook everything together, and I'll bring some too and my box of terminals and wiring tools.

Im not sure when we will get there, aiming for mid-late afternoon Thursday.

Andy Neuman wrote: Is there a list of things you plan to accomplish in the parking lot?

Them all?

Did you get the wheel?

I did thank you. Going to mount them this week when i get back in town.

In reply to patgizz:

I keep some wire/terminals/crimper in my van & I'm pretty sure I have a toggle switch. I'll be there Thursday late-afternoon/early-evening.

Now i just need to load all the tools etc...

I have some push buttons and a soldering iron.

If you need any more stuff let me know. I have electrical doodads, JB weld, loctite, and various tapes.

I should have most everything we would need. Now i just need to remember to load it.

What time in the morning do you plan to start? I'll be arriving late Wednesday/early Thursday. This is what I've picked up so far for snacks. I've decided I wouldn't get you guys any beer till either the frustration sets in or all the welding is done.

I figure 8:00 Wednesday arrival. We will start working Thursday around 7:00.

Man now y'all have me thinking I should pull Asa out of school for two days instead of just Friday.

Well, I'm all packed:

See you guys Thursday!