GRM on the road assist list

In reply to Purple Frog :

I foresee you meeting lots of fellow GRMers in late October each year!

I can attest that [canoes] offer stupendous roadside assistance.

In reply to Purple Frog :

Dad is just outside Havana.  Small world.

34.146599, -83.203788

About half way between Atlanta and Greenville, 15 minutes north of Athens. About an extra 15 minutes off of I85 (using different exits). I usually have a self storage unit that you can use, safe with security fence/gate. If all units are full, asphalt pavement. Ok if you need to leave a vehicle/trailer. Usually have a guest room for those of you that are established GRM regulars. If guest room is occupied there's plenty of space to camp with electricity/water and bathroom/kitchen privileges.

Road Atlanta is approx. 75 minutes, Atlanta Dragway about 30 minutes, dirt tracks all over the place. Big Stores in Athens and Commerce about 20 minutes.

Hasbro said:

yes you are right. thanks for your reply. [spam] issue is solved

Full shop with lift, no towing. I do travel a lot but give me a try if you need help

(37.9956961, -122.0743553)

Martinez, CA

Chicago, Illinois (Far south side)

41.7081257, -87.6465426

2 car Garage, air compressor, air tools, hand tools, jack, stands, cold pop, and Marlboro cigarettes for anyone in need! Lol

Canton, GA.

I am about 25 minutes off of I-75 at exit 290 (north of Atlanta, south of Chattanooga).

I have a towing capability, a shop, a lift, tools, welder, room to crash, food, and really good beer.

I work on the road a lot, but my wife and neighbors have a key to the shop if I am not there.

sevn sevn oh sevn sevn aight, sevn tree sex aight.

-Les

I moved so I need to update my address. 

122 Fitz Henry Road, Smithton, PA 15479

This is the Flying J truck stop on Interstate 70.  It's a mile from the new house.

Same full set of hand tools, air tools, mig and flux welding, even plasma cutting if you really berked something up, but with slightly more garage space. Spare couch, and 10 minutes from all the major parts stores. 

I still don't have a trailer, but I got AAA if you're close enough. 

Winchendon Mass

42.681068, -72.048889

two lathes, milling machine, Arc, mig, tig welders, metric crap-ton of tools but no lift.

Tow rig 

Feel Free to add my location: Near Irwin PA.

(40°20'09.9"N  79°40'16.7"W )

Somewhat close to RevRico, he is very close to I70

5 Minutes off of PA Turnpike / I$eventy6

10 Minutes off of I70

19 Miles / 30 Minutes From Keystone Raceway (Dragstrip)

60 Miles / 1 Hour From Pittsburgh International Race Complex  / PittRace Roadcourse

2 Garages, Most but not all tools, 2 Post, Hyd. Press, Rimclamp Machine, Mig, Small TIG, Small Lathe.

5 Minutes from NASA Approved Tech Shop.

Happy to help!

Greg

I apologize, i've been away from the forum (and racing) a bit since my wife had our second child. I'll parse through these this week and get a ton of updates done. don't want this to die!

I've moved across the state from Jamestown to 42.948, -74.196. Now with garage space, an open car trailer and some welding ability.

I'm surprised we haven't heard more stories of this feature coming into play. I know for my roadtrip last year I scoped out the folks along the way. Luckily nothing needed besides a preplanned stop at a friends garage.

28.759159, -81.267993

Sanford, Florida 32773.  Near 417 and Lake Mary Blvd, my place is about 1 mile from the pin location listed above.

My home shop is pretty well equipt including a lift, engine hoist, welders and a good variety of tools.  That's all well and good, if it's not packed full of projects and Honda parts!  I travel a good bit for work, but can assist even if I'm not currently home.

I also have a guest room to crash in and can give a lift or trailer most vehicles as well.

Jason

phone - for oh seben nyne too nyne too tree too oh

crxjay at Gee mail.com

In reply to KyAllroad :

sensational. 

In reply to Catch22 :

sanford Eh?

We were supposed to take the Auto Train there in june... then Covd-19.

Greg

In reply to aussiesmg :

Nice, thank you for uploading it

In reply to aussiesmg :

thank you for your great assistance

29.321090, -98.335437

I thought i was in here already, derp!

Anyways, ASE Master Tech/auto instructor, small shop, can technically do anything although major work isn't free OR fast 

I've had friends from different states buy cars here, bring them to my place, i fix them up and they fly in and drive home later. I can also stash cars for fairly long periods as long as it rolls or shows up on a flatbed.

Phone  -  two10-381-38four1

Adam

Good morning!

I noticed I was still showing in Kuwait.   

I am no longer at:  29°06'18.5"N 48°08'04.9"E

My new location is:  47.3260° N, 17.4698° E

Hand tools, basic power tools, DC Tig, Electrical troubleshooting and repair equipment, extra bedroom, extra vehicle, cold drinks (no automotive emergency needed, travelers welcome), local knowledge, and access to spare parts etc in a hurry.  If you're in the area, chances are I can drive out to ya.

"willgrow" with the number "3" at the mail that starts with a "g"

phone number is "plus sign, thirty six, thirty, nine-hundred and fourty six, seventy six, twenty eight"

Cheers!

I just realized I never put myself on this list. 

Location is Rochester, NY (on the North side by the lake) at 43°13'24.9"N 77°37'08.9"W

Best contact is by phone or email.  Email address is rob@[lastname].net.  [lastname] is my username minus the first letter.  Phone is two hundred three, 962, thirty-eight seventy-eight

We have a spare bedroom if needed and may at times have an extra car available.  Just be aware, the first couple feet of the driveway are pretty steep and not friendly to overly low cars.  With an appropriate stance crawl, my E38 clears it, but anything lowered more than an inch or 2 likely won't make it without smacking the rocker panels on the sidewalk. 

Garage wise, we've got a heated extra-deep 2 car (will fit most vehicles with the Jeep still sideways in the back, if I pull the Jeep out it'll fit a crew cab / long bed pickup with room to spare).  Good assortment of hand tools, some power tools, air compressor, MIG welder, and a good assortment of random spare parts, fluids, etc. 

SE NH

43.2582359,-70.8705149

Clogged up barn shop. MIG, tons of tools, Quickjack lift (20"), 2 helping hands, beer.

rdgrnr on the g site mailthingy

39.304778,-95.300132

25 minutes north of Lawrence, KS just off the I-70 corridor. Variety of covered shop/storage space. Own a tow dolly and have access to 3/4 ton truck, can tow within a modest radius. Couple spare rooms available. Welder and standard compliment of power/hand tools.

Phone (leave a message) or text is most reliable, seven eight five, eight fifty, twelve seventy-four.

San Diego. Just outside La Jolla.

Two lifts all hand tools. Some welding and fabrication available. Parts on hand for air cooled vw and some small block Chevy. 

Shop in West Wyoming, PA zip code 18644 and home in Dallas, PA zip code 18612. 

Garage with every tool known to man, lift, trailer, plenty of parking for trailers & motor homes. Approximately 15 minutes of of exit 170B or 175 of I-81 in northeast PA. 
 

Shop: 41.314383  -75.842517