I don't know if we already have a post in a different section or not, but I am here (just north) in Atlanta.... I have stuff....parts, shop, welder, beer, etc., if you need anything. I plan on leaving early Thursday to get down to G-ville. Willing to help along the way. 770-778-7368.
-Les
Good to know Les, see you trackside brother, heading out Wednesday.
JFX001
UltraDork
11/11/13 7:12 p.m.
You guys be safe. Not much help here due to central Ohio location, but I'll be here if needed.
SVreX
MegaDork
11/11/13 7:13 p.m.
I will likely be the last chance for many.
Albany GA. Decent shop, welder, trailer, tow vehicle.
I won't be leaving until 5 PM Thurs. Heading down I-75. I'll be in Gainesville about 8 PM.
Just call. twenty-two9-nine28-too6to6.
SVreX wrote:
I will likely be the last chance for many.
Albany GA. Decent shop, welder, trailer, tow vehicle.
I won't be leaving until 5 PM Thurs. Heading down I-75. I'll be in Gainesville about 8 PM.
Just call. twenty-two9-nine28-too6to6.
Will be waiting with cold beer!
-Les
fastasleep wrote:
aussiesmg wrote:
Good to know Les, see you trackside brother, heading out Wednesday.
Gina coming?
-Les
No, she is still struggling with her health, she has another procedure immediately after the Challenge
I'll be just north of Houston until Friday morning and then I'm headed to Atlanta. I can probably arrange a rescue anywhere between here and New Orleans if needed. Drive safely.
If anybody is heading past Raleigh, NC and needs a hand, let me know
nineonenine-fourhundredtwelve-ninethousandninehundredeighteen.
Canton MI (between Detroit and Ann Arbor), seven 3 four - sixthreefour - 656six. hand tools, big brain, little fear.
SVreX
MegaDork
11/12/13 3:55 p.m.
In reply to AngryCorvair:
How many Challengers do you expect to be driving by YOUR house?
Oh wait, there was that one guy with a MINI!
I-75 goes North of me for about 350 miles. no telling who might be coming down from da UP, eh? or perhaps some godless canadians might be crossing at the Ambassador or Blue Water bridge, which would run them through tha D.
is that MINI going to make the dance this year?
yamaha
PowerDork
11/12/13 4:50 p.m.
I'm right off I-69 halfway between Ft. Wayne and Indy if anyone is heading that way. Heated shop, welders, etc available if need be.
7six5-six23-two8tootwo
Who could be called that can post immediately if someone gets stranded? I was blessed by fast response GRM style 2 months ago.
mndsm
UltimaDork
11/12/13 5:42 p.m.
Erm, generally speaking, I am available pretty early and pretty late. Texting is fastest for me, I may not be able to accept a call, but I always have my phone on me and my laptop close by.
nine-fiftytwo, 9four four, six four 2 three.
However, I am about as out of the way as humanly possible. I'm in MN... seems like most if not all of the contenders are already east of me.
If any of you guys end up spending the night around Macon/Warner Robins we'll met for a beer, or if you need help, call me. I'm 5 miles off 75 at exit 142, just south of Warner Robins. Tools, welder, shop & such, but no trailer. plenty of parts places around here too. For seven eight-nine seven too-2744 - Dave S.
Swank Force One is rolling out with a suspect bottom end so we'll be keeping this thread handy.
Swank Force One wrote:
Swank Force One is rolling out with a suspect bottom end so we'll be keeping this thread handy.
You have a suspect bottom end. That made me chuckle.
SVreX
MegaDork
11/12/13 9:45 p.m.
wheels777 wrote:
Who could be called that can post immediately if someone gets stranded? I was blessed by fast response GRM style 2 months ago.
I can do it.
I'll be one of the last ones to hit the road, and I have a smart phone. If I get a trouble call from anywhere, I'll post it on the board.
Paul 22niner, niner28, 2626
stan_d
Dork
11/12/13 10:47 p.m.
Stuck in stopped traffic
Mm 341 in GA I75
I know it's early. 11:46pm tue
Jeez Stan, get kicked out of bed or something?
Hey mods - should we make this thread a sticky till after everyone's home?
yamaha
PowerDork
11/13/13 7:25 a.m.
In reply to Swank Force One:
Holy crap you got it put back together.....