DeadSkunk  (Warren)
DeadSkunk (Warren) MegaDork
10/29/24 9:47 a.m.

Just happened to see this on marketplace and wondered if it's a bargain for someone at $200........The SN-96 tag tells me it's for a Mustang, but what else can you knowledgeable folks deduce? The engine in the pics is an LS, which throws me off....(more pictures if you open the ad link)

Marketplace - muncie 5 speed prototype transmission | Facebook

Product photo of muncie 5 speed prototype transmission

Product photo of muncie 5 speed prototype transmission

 

 

Ranger50
Ranger50 MegaDork
10/29/24 10:47 a.m.

Looks like a new venture 1500 or 3500. S10/silverado. I'd rather have a 4.07 first gear t5....

budget_bandit
budget_bandit Reader
10/29/24 12:31 p.m.

that's definitely not an SBC/LS bolt pattern on the bellhousing, so i'd bet it's for the other GM V6 engines (3.something, i can't remember)

81cpcamaro
81cpcamaro SuperDork
10/29/24 1:12 p.m.

That is the 60 degree bellhousing pattern, so either V6 or 2.2L 4 banger.  LS would grenade that transmission pretty easily.

wvumtnbkr
wvumtnbkr GRM+ Memberand UltimaDork
10/29/24 2:19 p.m.

I'm not sure an NV trans ever came connected to a 60 degree v6.  It was pretty much T5 only in RWD applications.

It does look like the metric (60 degree v6) or Northstar pattern.

Unless, that is a prototype for T5 replacement, I can't think of what it would be out of.

Did they ever put these in jeeps or Isuzu?  They share the GM metric pattern.

bobzilla
bobzilla MegaDork
10/29/24 2:24 p.m.

In reply to 81cpcamaro :

looks like the NV1500 behind the 2.2L in the S-dimes. 

wvumtnbkr
wvumtnbkr GRM+ Memberand UltimaDork
10/29/24 2:33 p.m.
bobzilla said:

In reply to 81cpcamaro :

looks like the NV1500 behind the 2.2L in the S-dimes. 

It's got that weird ridge on the top of the bell housing that doesn't look like the "normal" s10 bell.  Other than that, id say that's it.

You'll need to log in to post.

Our Preferred Partners
bUxFiBDZW4VJJz0YPQeZXx0FdmermzwWcS25SzOgqChofydmSch6lUUuyWymZIxv