1 2
unevolved
unevolved HalfDork
12/4/10 4:52 p.m.

So we took apart the engine that spectacularly let go right before the '10 Challenge. Here are some teaser photos:

No question about this one, I don't think it's salvageable. I'm thinking of making the internals into a robot.

http://saeintl.tamu.edu/grassroots/civic/destroyedengine

EvanB
EvanB GRM+ Memberand Dork
12/4/10 4:54 p.m.

Is there an award for the most catastrophic failure on the way to the Challenge?

unevolved
unevolved HalfDork
12/4/10 5:33 p.m.
EvanB wrote: Is there an award for the most catastrophic failure on the way to the Challenge?

I kinda hoped we could win by proxy.

DILYSI Dave
DILYSI Dave SuperDork
12/4/10 5:33 p.m.

How the hell do you throw 3 rods? Seriously - did they all let go at the same time or did it run for some length of time with one bad one, then two, then three?

914Driver
914Driver SuperDork
12/4/10 5:41 p.m.

Except for the drain ports, it's very pretty.

unevolved
unevolved HalfDork
12/4/10 6:17 p.m.
DILYSI Dave wrote: How the hell do you throw 3 rods? Seriously - did they all let go at the same time or did it run for some length of time with one bad one, then two, then three?

Four. All four shattered in a fraction of a second. It was a 75 shot of nitrous. The only thing that makes sense is the engine was severely abused by it's previous owner, which is very possible.

Marty!
Marty! Dork
12/4/10 6:58 p.m.

Outside of some NHRA engines that I've seen, that has to be the most catastrophic failure I've seen.

Jensenman
Jensenman SuperDork
12/4/10 7:19 p.m.

Dang, y'all hard on parts.

Nitroracer
Nitroracer Dork
12/4/10 7:23 p.m.

Impressive damage gentlemen. How many pieces has that block turned itself into?

unevolved
unevolved HalfDork
12/4/10 7:36 p.m.

I don't know, several dozen. Most of the voids you see in the pictures turned into pieces about the size of a dime.

And yes, we are hard on engines. We blew up an engine before this one with too much boost.

RexSeven
RexSeven Dork
12/4/10 8:07 p.m.

Haven't you guys watched "The Fast and the Furious" before? Didn't you get this message on your laptop before the floorboard popped out and your engine asploded?

Seriously, that's a horror show. I was LMAO while looking at those photos.

Drewsifer
Drewsifer HalfDork
12/4/10 8:45 p.m.

And the engine Gods wept...

What a way to go though.

Mazdax605
Mazdax605 HalfDork
12/4/10 8:49 p.m.

What kind of engine WAS that?

alex
alex SuperDork
12/4/10 8:56 p.m.

Properly borked. Well done. No point in half-assing these things.

unevolved
unevolved HalfDork
12/4/10 9:00 p.m.

It used to be a D15.

914Driver
914Driver SuperDork
12/4/10 9:01 p.m.

Was it the NOS or the build? Inquiring minds want to know.

Dan

unevolved
unevolved HalfDork
12/4/10 9:28 p.m.

The engine wasn't built, it was definitely the nawzzzz.

I bought the engine from an asian kid named Johnny in Houston for $150 who had it in his boosted Del Sol that he (probably) street raced and beat the piss out of, if my guess is correct.

Pat
Pat Reader
12/4/10 9:38 p.m.

I bet that made one hell of a sound when it let go!

neon4891
neon4891 SuperDork
12/4/10 9:41 p.m.
unevolved wrote:

So great it needed to be posted agian.

Simply WOW

unevolved
unevolved HalfDork
12/4/10 9:46 p.m.
Pat wrote: I bet that made one hell of a sound when it let go!

Probably the most depressing noise I've ever heard in my life.

Rob_Mopar
Rob_Mopar HalfDork
12/4/10 10:40 p.m.
unevolved wrote:
DILYSI Dave wrote: How the hell do you throw 3 rods? Seriously - did they all let go at the same time or did it run for some length of time with one bad one, then two, then three?
Four. All four shattered in a fraction of a second. It was a 75 shot of nitrous. The only thing that makes sense is the engine was severely abused by it's previous owner, which is very possible.

Should have gone for the 100 shot for all 4.

Vigo
Vigo Dork
12/5/10 12:31 a.m.

my 2009 car might have blown up in 2010 if i had.. like.. driven it any.

Nice carnage.

nickel_dime
nickel_dime Dork
12/6/10 10:55 a.m.

If your going to go.... go big.

pete240z
pete240z SuperDork
12/6/10 11:26 a.m.

that'll buff right out

mndsm
mndsm Dork
12/6/10 11:30 a.m.

I got a tube of JB weld- we can fix that.

As an aside, I think I'm more impressed by the piston than the hole(s) in the block. You know how to kill one proper!

1 2

You'll need to log in to post.

Our Preferred Partners
sBoFe5qZT3OBy2cv1T1Ze2TLm36U88dcs8UQZ4DcJmPNcGUn3g3eziKqXCbxT9kk