how to make a roll bar stiffer...-Page 2| Grassroots Motorsports forum |

Advan046 SuperDork
11/30/14 9:12 a.m.

spork wrote: I'm truly confused why nobody has mentioned the 22 mm front bar from the 03+ sxt/SE, the 24 mm bar from the srt4, or the 26 mm bar from the play cruiser get. They are all available in junkyards and on eBay. I paid $30 shipped for my SRT bar and loved it. The car also has a Progress hollow rear sway, I think it's 19 mm. Granted, mine is an 03 but one thing I've learned about Chrysler is that they make car parts like Legos. Your sway setup should be similar on the body and k frame. I'd recommend 2gn.org, is for later neons but I like it a lot more than neon.org; good knowledge base.

I assume your car is a first gen Neon?

iceracer PowerDork
11/30/14 11:09 a.m.

Cars with the 22mm bar also came with a rear bar. 16/19 mm. Some thing to consider. Especially the rear bar.

spork New Reader
11/30/14 11:10 a.m.

In reply to Advan046:

No, as mentioned, mine is a 2gn. But I know that the sway bars were basically unchanged. If I wanted to run a 20 mm sway in front, I'd grab one from a first gen neon. Come to think of it, I've got a 22 mm in my garage that I need to get rid of as I'm selling the neon tomorrow.