1 2 3 4
pres589
pres589 HalfDork
9/28/10 8:08 p.m.

'72 Ford / Mercury Capri with some kind of V8, like a worked 302 Ford.

Oh wait that's just one car I'd like to put together for myself anyway...

Osterkraut
Osterkraut Dork
9/28/10 8:19 p.m.

Dyno queen? Well that $3,000 Peterbuilt somebody posted the otherday aughta be able to BREAK some dynos.

Sleeper? Your typical well-loved northern-state 1st gen Forester, stickers, roof rack, the works... massively built STi drivetrain. AWD means you could get away with less suspicious tires, too.

RexSeven
RexSeven Dork
9/28/10 8:46 p.m.

My MS3 is a bit of a sleeper. It rarely gets a second glance from the cops, ricers, or other drivers. I get plenty of looks from the normals when I romp on the throttle, though.

But this takes the cake for a sleeper, IMHO. The ricey bits (wheels, headlights, lip, etc.) fit in fine since I live next to Ghetto-Rice Central, but I would toss 'em and paint the car beige were I to live anywhere else.

http://www.youtube.com/watch?v=2aC4oVEVC68&feature=player_embedded

DMT's Big Turbo Toyota Camry V6

-Built 3.0L 1MZ-FE by Canadian Cyl Head Tech
-TRD Supercharger + HKS T51R KAI BB, 1.00A/R
-Custom EL sidewinder manifolds
-4.0" Downpipe / Dual 2.5" Exhaust
-Import Performance Trans (IPT) Built Automatic Transmission w/Custom Manual-Matic Shift Control (Manual gear control)
-High Stall Converter
-Canadian Cyl Head Port Work
-Built Valvetrain (Springs/valves/retainers)
-Custom AEM EMS
-HKS DLI / MSD BAS
-Racetronix 68lb/hr Injectors
-Meth & Sunoco 94 oct
-Tuned by Dynamotorsports

Best of 567 WHP & 468 lbft @ 26 PSI Visit Dynamotorsports.ca for dyno results

Keith
Keith GRM+ Memberand SuperDork
9/28/10 9:27 p.m.
Knurled wrote:
mndsm wrote: y'all ever made one o' them LS-Miatas with a supercharger? Methinks a twin screw under a slightly sectioned hood would be hilarious.
The engine I posted above basically fit anywhere a standard Gen III would.

Not in a Miata, I'm afraid. Or, the engine might but the turbos wouldn't. Which I suspect would take some of the fun out of it.

Anyone who wants to see an LS Miata with a supercharger - send money.

Taiden
Taiden Reader
9/28/10 9:37 p.m.
Keith wrote: Anyone who wants to see an LS Miata with a supercharger - send money.

Would it look something like this?

nervousdog
nervousdog Reader
9/28/10 9:53 p.m.

I would build a twin-engine Hyundai. I know its been done before but this looks like so much fun.

Twin engine Tibby

The hoonage at the end was done by putting one transmission in drive and the other in reverse.

MikeSVO
MikeSVO Reader
9/28/10 10:02 p.m.

I'd buy the truck a local guy has. It's one of those 454 SS Chevy trucks. I'm sure you've seen one... But it's got a 540-something ci motor with a pair of turbos mounted in the bed, under a louvered bedcover. It's a 4000+ lb. truck that I've seen run 9.80's in the quarter, and drive on the street, too. In fact, it still has A/C and a radio. It's a nice truck!

ValuePack
ValuePack HalfDork
9/28/10 10:19 p.m.
Osterkraut wrote: Sleeper? Your typical well-loved northern-state 1st gen Forester, stickers, roof rack, the works... massively built STi drivetrain. AWD means you could get away with less suspicious tires, too.

Oh God, that's good.

In keeping with the Subaru theme, I've been hankering for a stock-bodied mid-'80s GL wagon with an ITB'd Toyota 1UZ small block and rear drive. I'm curious what it'd cost to have the stock white 13x5 wagon wheels upsized to 15x7. grin

Taiden
Taiden Reader
9/28/10 10:24 p.m.
ValuePack wrote: In keeping with the Subaru theme, I've been hankering for a stock-bodied mid-'80s GL wagon with an ITB'd Toyota 1UZ small block and rear drive. I'm curious what it'd cost to have the stock white 13x5 wagon wheels upsized to 15x7. *grin*

I endorse this product and/or service.

grimmelshanks
grimmelshanks HalfDork
9/28/10 11:29 p.m.

i can think of endless fun sleepers to build but one cool one that comes to mind is to build up an old maxima with a vg30. i know those motors are STOUT and i like the idea of putting down 300+ in a maxima. did those have intermediate axle shafts, or will torque steer make me jump lanes?

ScottRA21
ScottRA21 Reader
9/28/10 11:46 p.m.

Of course....

I also want to take a 2 door Chevette, especially one with mis-matched doors, half rotted hatch, and maybe a mis-matched hood or fender....

And drop in the suzuki H27a v6....with a turbo.

Yeah....ridiculous, I know.

Jay_W
Jay_W HalfDork
9/29/10 1:20 a.m.

I'm pretty happy with my stupid 19 year old 4wd mazdog protege, built slightly beyond the limits of the infamous gearbox, it puts down something in the 320 hp range at 23 psi. Pulling the trigger on that 600 hp honduh must be a total laugh riot

But I knew cold even before I finished reading the first post that Keith was gonna put up what I think is one of the ultimate sleepers...gotta save my pennies for that one.

MikeSVO
MikeSVO Reader
9/29/10 5:42 a.m.

I keep thinking that doing it in a FWD car couldn't work out too well though. Any tire that lets you actually USE the power is going to throw your sleeper effect right out the window!

Otto_Maddox
Otto_Maddox Reader
9/29/10 8:35 a.m.

Pop in a huge turbo diesel and rip up the dyno. Nobody would see it coming.

kb58
kb58 Reader
9/29/10 8:40 a.m.
Appleseed wrote: ...Are we talking dyno queens or sleepers?

That's what I was going to ask. If it's "stock appearing", then you guys wanting to put 600 hp in something with 155/75-14 tires on it are wasting your time.

If it's a "dyno queen" it implies all that's cared about is peak power. There's plenty of those videos on YouTube.

Raze
Raze Dork
9/29/10 8:51 a.m.

Yeah, I'm confused, sounds like you want ideas for the coolest sleeper dyno queen? In that case take any old E36 M3ty car, truck van, insert massive powerplant, add compound turbocharging, and blam, insanity...

Ranger50
Ranger50 Reader
9/29/10 9:07 a.m.

Click me

This has ultimate potential for both ideals....

Brian

Taiden
Taiden Reader
9/29/10 9:43 a.m.

I don't have any plans to build any such car, I just think it's fun to think about.

93celicaGT2
93celicaGT2 SuperDork
9/29/10 10:00 a.m.
RexSeven wrote: My MS3 is a bit of a sleeper. It rarely gets a second glance from the cops, ricers, or other drivers. I get plenty of looks from the normals when I romp on the throttle, though. But this takes the cake for a sleeper, IMHO. The ricey bits (wheels, headlights, lip, etc.) fit in fine since I live next to Ghetto-Rice Central, but I would toss 'em and paint the car beige were I to live anywhere else. http://www.youtube.com/watch?v=2aC4oVEVC68&feature=player_embedded DMT's Big Turbo Toyota Camry V6 -Built 3.0L 1MZ-FE by Canadian Cyl Head Tech -TRD Supercharger + HKS T51R KAI BB, 1.00A/R -Custom EL sidewinder manifolds -4.0" Downpipe / Dual 2.5" Exhaust -Import Performance Trans (IPT) Built Automatic Transmission w/Custom Manual-Matic Shift Control (Manual gear control) -High Stall Converter -Canadian Cyl Head Port Work -Built Valvetrain (Springs/valves/retainers) -Custom AEM EMS -HKS DLI / MSD BAS -Racetronix 68lb/hr Injectors -Meth & Sunoco 94 oct -Tuned by Dynamotorsports Best of 567 WHP & 468 lbft @ 26 PSI Visit Dynamotorsports.ca for dyno results

Beat me to it. The videos of that car are scary as berkeley. That dyno result was on the old setup without the supercharger i believe.

I don't like the front lip, but it's not rice, though. That's the actual TRD lip that was used on the factory Camry Touring Cars.

There's also a late 80s 4 door camry running around with full ST205 Celica GT4 running gear under it, though i can't find pictures of it right now.

And just because these things are hilarious.... here's some more lulz:

Hal
Hal Dork
9/29/10 10:16 a.m.
Taiden wrote:
Hal wrote: <------ I already have mine: My Focus
Hey is that a 2.3L duratec? Back in the day I was looking for one, because it seemed that a lot of guys were seeing *HUGE* gains with boltons.

Nope it's a Zetec but I got my huge gains from a bolt-on. A PowerWorks supercharger!

81gtv6
81gtv6 GRM+ Memberand Dork
9/29/10 10:56 a.m.

0-100 km/h: 6s, 0-200 km/h: 12.65s, 0-250 km/h: 17.8s, 0-300 km/h: 27s

Dyno performance: 666bhp@7458rpm, 690Nm@5993rpm (601whp), (Bhp per litre 334)

Standing mile record: 308km/h

Taiden
Taiden Reader
9/29/10 10:59 a.m.
81gtv6 wrote: 0-100 km/h: 6s, 0-200 km/h: 12.65s, 0-250 km/h: 17.8s, 0-300 km/h: 27s Dyno performance: 666bhp@7458rpm, 690Nm@5993rpm (601whp), (Bhp per litre 334) Standing mile record: 308km/h

THat's what I like about Saabs that accelerate well. Performance where it counts most for street use (merging on the highway for example).

oldeskewltoy
oldeskewltoy Reader
9/29/10 11:02 a.m.

For a dyno queen... meaning she rules......

Get me a Banks Racing tuned diesel - upwards of 1000hp and 1500#/ft of torque

psteav
psteav GRM+ Memberand Reader
9/29/10 11:54 a.m.

I always thought that an easy, cheap sleeper recipe would be:

1) Buy lightly wrecked SRT-4 2) Replace wing/hood/fascia with stock neon parts (think you'd have to ditch the FMIC, as well) 3) Paint beige 4) ??? 5) Profit.

kb58
kb58 Reader
9/29/10 11:57 a.m.
81gtv6 wrote: 0-100 km/h: 6s, ...Dyno performance: 666bhp@7458rpm

That's either a typo or crazy-wrong gearing. 666 hp and only 6-sec 0-60?! Since it appears to be a top-speed sort of car, I'll assume it's for real, but after all that work and money, it must suck losing stoplight Grand Prixs with dead stock Mustangs, lol.

1 2 3 4

You'll need to log in to post.

Our Preferred Partners
3VSUIINEMz515lgVxeXKAWPeDDCwsAcchtcy5ruNOSezgKvCU8jWkiAqp0gokytK