Your parts car wouldn't happen to be an ABS car would it? I can send you mine back, its just got slop in it where the balljoint attaches so you could keep the car "moveable" I stole the hub off the MX-3 but it will need to be swapped back as it has no ABS mounting.
Good question, i will find out.
It does have abs. So you have the messed up one sitting off the car?
No, its on my MX-3. I can take it off in 15 minutes though and I have a spare jackstand ;-)
Where in the world are you guys finding these ABS cars? I've never even SEEN one, and i have people telling me that my ABS-less 1990 is uncommon. 
Eric's first black one was an ABS car.
Ah ok... so i guess i've seen ONE. 
I was surprised it had abs. I will try to pull the spindle either wednesday or saturday and see if you still need it by then. I need to swap the LCA onto the 626 anyway so the spindle is not much more work anyway.
I pulled the spindle. Funny that you were looking for an ABS spindle because the speed sensor holes are jacked on this one and would need to be retapped or possibly heli-coiled. Still want it?
Yeah. Its easy enough to do.
PM'd.
So the car had a recent timing belt by the previous owner and the belt was making noise and upon inspection, I find this
The crank pulley gear was installed backwards!!! I installed a new water pump, and while I was at it a new heater core.
I've never seen that before. Hope that spindle helps you out. Thanks for the trade! That set of shifter bushings means i finally have a complete set and can drive the car without getting mad at it now.
Lol... every Mazda/Ford car I've owned needed them.
In reply to Vigo:
For some reason, these cars attract some real idiots.
Sadly this is true...
Swank Force One wrote: In reply to Vigo: For some reason, these cars attract some real idiots.
Case and point.
Spoolpigeon wrote:Swank Force One wrote: In reply to Vigo: For some reason, these cars attract some real idiots.Case and point.
Heyooooo!!!!!!!
I hatechu.
You'll need to log in to post.
