Ode to Fel-Pro| Grassroots Motorsports forum |

EvanR Reader
8/6/12 2:27 p.m.

Oh! Fel-Pro!

How I love you!

For knowing it is impossible to replace the valve cover gasket on an Iron Duke without pulling the EGR valve.

And including an EGR valve gasket with the valve cover gasket!

Amen!

Alan Cesar Associate Editor
8/6/12 2:54 p.m.

Surprises like this with any product make me indelibly happy.

So do silly poems like this.

Per Schroeder Technical Editor/Advertising Director
8/6/12 3:06 p.m.

I sent this on to our contacts at Fel Pro....nice people.

Per

RossD UltraDork
8/6/12 3:14 p.m.

Can I haz it in a haiku?

DaveEstey Dork
8/6/12 3:26 p.m.

Surprise from Fel-Pro

Extra Gasket for Iron Duke

GRM Approves

EvanR Reader
8/6/12 3:27 p.m.

RossD wrote: Can I haz it in a haiku?

Bonus E-G-R

Gasket makes me happy, thanks!

Long live Fel-Pro dudes!

Jay_W Dork
8/6/12 3:45 p.m.

Felpro thinks ahead

Fills the need, without asking

So the Duke leaks not

dean1484 GRM+ Memberand UltraDork
8/6/12 4:32 p.m.

Yep,

I just got a top end gasket set from Felpro for my 94 mustang (98 motor) and was pleasantly surprised to see the gasket for the EGR as well. Saves a lot of grief. Pass on my thanks!!!!

Ohya and there gaskets for the intake and the heads look to be very well made not like the junk that failed.

93gsxturbo Dork
8/6/12 5:21 p.m.

Ive always liked Fel-Pros as well. Maybe not the best, but good enough for all my daily driven crap, readily available, and priced right! Never blew one out, even the composite headgasket on my 90 TSi AWD that all my friends thought I was dumb for using. Torqued those ARPs down tight and ran 25-28 PSI on pump gas daily!