Craigorypeck
Craigorypeck New Reader
1/25/18 11:50 p.m.

Anyone happen to hook the vss from a t5 transmission to a megasquirt?what signal does the sensor output and what inputs should I be using on Ms?

I'm  told its a reed switch sensor.

Trans is from a foxbody mustang. 

 

Thanks 

Stefan
Stefan GRM+ Memberand MegaDork
1/26/18 9:41 a.m.

Here's a thread that I found on VSS via Reed switch and MS input:

http://www.msextra.com/forums/viewtopic.php?f=131&t=36962

Not entirely sure why you'd need to add this to the MS, but there's some solutions listed there.

GameboyRMH
GameboyRMH GRM+ Memberand MegaDork
1/26/18 10:00 a.m.
Stefan said:

Not entirely sure why you'd need to add this to the MS,

Speed-based boost control, traction control, launch control, auto trans control, or even a top speed limiter if you wanted one for some weird reason (maybe if you can exceed your tire's rated max speed).

Craigorypeck
Craigorypeck New Reader
1/26/18 8:28 p.m.
Stefan said:

Here's a thread that I found on VSS via Reed switch and MS input:

http://www.msextra.com/forums/viewtopic.php?f=131&t=36962

Not entirely sure why you'd need to add this to the MS, but there's some solutions listed there.

Thank you for that..

Craigorypeck
Craigorypeck New Reader
1/26/18 8:30 p.m.
GameboyRMH said:
Stefan said:

Not entirely sure why you'd need to add this to the MS,

Speed-based boost control, traction control, launch control, auto trans control, or even a top speed limiter if you wanted one for some weird reason (maybe if you can exceed your tire's rated max speed).

Yes speed based boost control. I may as well hook it up now when wiring. May never be used....! 

You'll need to log in to post.

Our Preferred Partners
5Zq1oZYm4FI4owxJCK4ShBCNEWm5qaMjHUM4KHm9Z4byR548lz7q24n4TZ3I0kFx