I was having the fuel tank replaced on my 1984 Charger 2.2, but the shop doing the work broke the roll over valve when removing it from the old tank. No one not even Dodge dealers, has one. We are trying the junk yard route, but they snap when attempting to remove. I am desperate and will take any help I can get. FYI: It has to be one the fits into the hole in the tank. I cannot use an inline style as there will be a gaping hole on the tank.
In reply to Moparman:
Any idea if one from an '86 Daytona Turbo Z is the same? My parts car is still here and I'm planning to drop the tank anyway.
Possibly, part number s/b 4185254
If the weather cooperates this weekend I'll have the tank out and check the P/N.
Weld up hole in tank and eliminate this "feature"?
Think we located one
OK.
I'm still planning to pull more of the parts car apart this weekend if you wind up still needed it.
Ive had so many 80s mopars and i have no idea what part you're talking about. The check valve in the filler tube?
Rollover valve is in. Thx
You'll need to log in to post.
