Any reason i cant/shouldn't use it to feed pressure from the knockoff walbro to the bulkhead fitting? Will be running 60psi-ish fir the ls swap. Would use efi style clamps at both ends. The foot of submersible rubber hose is $30 now....
Any reason i cant/shouldn't use it to feed pressure from the knockoff walbro to the bulkhead fitting? Will be running 60psi-ish fir the ls swap. Would use efi style clamps at both ends. The foot of submersible rubber hose is $30 now....
Send it.
Maybe. Not all nylon tube is created equal. Some of the marine stuff is only rated to 40psi. If what you've got is actual automotive fuel line with a known rating then yes, it can be used. However, it should only be used with the correct fittings and those are press fit and require a tool.
It came with the fuel pump? Use it. That's what it's for. Pretty much all manufacturers use that in their FP modules.
Cool. It was included in the box my new fuel pump came in, Along with the wiring, sock, a couple clamps, etc. I knew id neen them in oe pump modules, but couldn't remember the application.
Thanks yall!
You'll need to log in to post.
