1 2 3 4
Toyman01
Toyman01 GRM+ Memberand MegaDork
8/11/16 6:37 a.m.
ultraclyde
ultraclyde UberDork
8/11/16 6:50 a.m.

Quoted from the hotlink thread, just for inspiration:

914Driver wrote:
dculberson
dculberson PowerDork
8/11/16 8:27 a.m.

In reply to wheels777:

That is quite a list!

BTW, do not google search assylum. I thought it was a clever misspelling but another industry has predictably gotten to it first.

1988RedT2
1988RedT2 PowerDork
8/11/16 9:51 a.m.

Corvairs are interesting. How tough a fit is that?

alfadriver
alfadriver MegaDork
8/11/16 9:54 a.m.
1988RedT2 wrote: Corvairs are interesting. How tough a fit is that?

Get the middie conversion, and it's even better. They drive rather nice.

penultimeta
penultimeta Reader
8/11/16 10:01 a.m.

I've always liked the 327 and consider them to be one of the few 1st gen small blocks worth swapping over an LS. Mostly just because they're cool.

With that out of the way:

c3 corvette should be up there on the list

'73-'77 GM A-body (if they're affordable in your area. They are not in mine.)

'78-'79 Cutlass or Regal

'67-'72 c10 (prices vary wildly for these though. Again, might be geography specific)

As you can see, I think that old school small blocks belong in old school GMs.

ultraclyde
ultraclyde UberDork
8/11/16 10:10 a.m.

oh, I think Corvair wins the prize. Even better for a mid-mount. They're smaller, classic, and fairly cheap to acquire.

pres589
pres589 UberDork
8/11/16 10:12 a.m.

In reply to 1988RedT2:

Maserati BiTurbo

curtis73
curtis73 GRM+ Memberand PowerDork
8/11/16 2:59 p.m.

Surprised no one has mentioned the P-body. Small blocks aren't hard to squeeze in there and plenty of conversion kits are available.

curtis73
curtis73 GRM+ Memberand PowerDork
8/11/16 4:00 p.m.
wheels777 wrote:
dculberson wrote: In reply to wheels777: That is quite a list! BTW, do not google search assylum. I thought it was a clever misspelling but another industry has predictably gotten to it first.
Sorry, that is an affectionate way of referring to the barn out behind the house.

Which could also be used to describe what you find with that google search.

maschinenbau
maschinenbau GRM+ Memberand Reader
8/12/16 7:26 a.m.

I vote El Camino, but I'm biased :)

When I was 14, dad and I started working on a '72. It became my first and only car until I was 20. No matter what you do, working on a car project together at that age will create some valuable memories and life lessons.

slantvaliant
slantvaliant UltraDork
8/12/16 7:38 a.m.
alfadriver wrote:
1988RedT2 wrote: Corvairs are interesting. How tough a fit is that?
Get the middie conversion, and it's even better. They drive rather nice.

Agreed. This one runs over 200MPH:

7 S photo 7S1.jpg <img

SBC, with a Mendeola transaxle, last I heard.

gearheadmb
gearheadmb HalfDork
8/12/16 8:08 a.m.

What is the plan for the car once it's done? Are there any automotive needs in household?(like do you need a pickup truck or a 9 passenger vehicle) V8 jeeps are fun but after driving them I would never put a 16yo in one, they are dangerous. I always wanted an 80s 4x4 suburban on a small lift. 3rd gen fbody would be fun and not difficult. 60s cars can still be had for cheap....if you don't mind four doors.

Chris_V
Chris_V UberDork
8/12/16 9:46 a.m.

Put a 283 crank in the 327 and end up with a high revving 302, put in a 914 for an 8k rpm screamer mid engine toy.

But my idea was originally to mount one in a slightly stretched nose VW Ghia, with radiused fenders and the rear transaxle out of a 944 using the 944 SBC swap kit (bellhouseing to match the one in the 944).

Again, an 8k rpm screamer in a unique body like this Pshop I did:

jstand
jstand HalfDork
8/12/16 11:42 a.m.

What about a K5 Blazer or Jimmy?

Plenty of years to pick from:

Or newer with a lower buy in:

Removable hardtop, manual, seats 5

TIGMOTORSPORTS
TIGMOTORSPORTS HalfDork
8/12/16 9:01 p.m.

78 Buick Regal for $600 no motor in K Town

http://knoxville.craigslist.org/cto/5706868559.html

vwcorvette
vwcorvette GRM+ Memberand SuperDork
8/12/16 9:23 p.m.

92 RWD GMC Safari. Oh wait, that's me.

I like the Camino suggestions.

Or Vega wagon. Better still make it look like a Cossie.

TIGMOTORSPORTS
TIGMOTORSPORTS HalfDork
8/12/16 9:27 p.m.

Vega wagon?

BAM! http://asheville.craigslist.org/cto/5727235118.html

FelicityPaige
FelicityPaige
2/17/22 10:55 a.m.

I`m in love with Buick Riviera 1971

Opti
Opti Dork
2/17/22 11:24 a.m.

My vote goes to a Bravada. I always wanted to make a V8 version of a scyty. Id even take it with a lazy tbi 350.

iansane
iansane GRM+ Memberand Dork
2/17/22 11:29 a.m.

So, did it happen?

frenchyd
frenchyd MegaDork
2/17/22 11:34 a.m.

Just a comment on those suggesting a Jaguar.  The worst part of the Jaguar is the wiring, followed closely by the HVAC .   Both of which are massively complex and frustrating. 
   So yeh if you want unreliable car with no heat in the winter or A/C in the summer it will fit in. 

AngryCorvair (Forum Supporter)
AngryCorvair (Forum Supporter) GRM+ Memberand MegaDork
2/17/22 1:00 p.m.

A 401 CJ
A 401 CJ GRM+ Memberand SuperDork
2/18/22 8:01 a.m.

Make a DeKon Monza replica.  I think Monzas are still fairly cheap if you can find one and the DeKons were some of the best looking IMSA cars in history.  I had a V8 Monza back in the day.  GM built in so much lightness (channeling my inner Colin here) that they were fun even with the most pedestrian small block.  Add a juiced up 327 and watch out!

frenchyd
frenchyd MegaDork
2/18/22 3:48 p.m.

In reply to A 401 CJ :

Be careful, the Dekon Monza is basically a tube frame car with a Monza skin.  
    I owned a early Monza V8 and just normal mildly spirited   driving had those little brakes ( 13 wheels ) fading.  Great nimble driving and it would be easy to replicate those flares to fit  the 15" wheels.  

1 2 3 4

You'll need to log in to post.

Our Preferred Partners
8yDHU7OiulkQP8Rl1IMLwn0k7k2V3FpkMADPcVlQ8bGkBHx1qqxA14CqojSrZunM