1 2
Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
7/31/24 12:27 p.m.

Traded the SV650 for a 2014 KTM 500exc with a clean title than runs. Couldn't pass up on that deal. Will make a more detailed post but this poor thing is rough. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/1/24 12:09 p.m.

1st order of business was the estart not working. Charged the battery (it was a little low) and try it. Slow crank. Checked for power where I need it and was good, and checked grounds. Found a ground wire zip tied to the subframe so I tapped a new hole since it was stripped and it fired up. But basically only get one start per battery charge. When running it charges fine, battery float charged fine, but soon as you put load on it, it dies. New battery and some replacement and service parts are on the way. 

fatallightning
fatallightning HalfDork
8/1/24 12:22 p.m.

Those usually have tiny batteries and high compression, I usually don't get many cranks even out of a good battery. I usually hit the decomp and kick it a couple times to prime the mixture. Very cool though!

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/1/24 1:23 p.m.

In reply to fatallightning :

Very small battery. Decomp is automatic on this, gonna check it when I check valves. But it fires first kick. Gonna put a lithium in like I do all my supermotos and enjoy the extra cca 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/2/24 10:23 a.m.

Got the lithium battery in, I always love the weight savings and extra CCA. Bonus put a fresh air filter in since the old one was super nasty. 

Changed the sticky and spinny grips for some freshies. 

Also found a Dyno jet tuner when poking around. Time to hook up the laptop and see what's happening. 

ae86andkp61 (Forum Supporter)
ae86andkp61 (Forum Supporter) GRM+ Memberand SuperDork
8/2/24 11:40 p.m.

Oooh, awesome! Great trade! I'll be following this one; looks like a ton of fun. 😁

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/3/24 8:05 a.m.

In reply to ae86andkp61 (Forum Supporter) :

One of the better trades I have ever made. It's not the nicest but we will get there. First test ride on it was fun, thing is a ripper. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/7/24 8:40 a.m.

New to me seat, going to try to repair the old one also. 

Changed the oil, flushed coolant, changed brake fluid and put new screws in since they where all mismatched. 

95% sure it needs valve stem seals since it smokes a little if you idle for a while and then rev it. Under load is fine. 

Ordered a new take off kickstand from eBay and this is what I got. Ordered a new one . 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/9/24 2:04 p.m.

New kickstand and stopper bolts are on, gonna be doing some digging into some smoking it's doing. 

 

Idle for a few min warm, hit the throttle and it puffs out some smoke. Pretty sure it needs valve stem seals. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/13/24 10:49 a.m.

New skid plate installed 

Put a few hundred miles on it so far. Smoking is not as bad, runs pretty good. I'm super pleased so far. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/19/24 10:53 a.m.

Stripped the bike down to do fuel filter in tank, check valves and some wiring. 

Fuel filter was nasty. 

Changed the plug also. Very very nasty also. 

Ran out of parts to finish fuel filter and installed a set of renthol RC highs and moved the bars forward. 

docwyte
docwyte UltimaDork
8/20/24 9:57 a.m.

I end up replacing those plastic fuel filters with metal ones, they like to split on the 690/701's...

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/20/24 10:21 a.m.

In reply to docwyte :

I bought a metal wix, I got the part number laying on the work bench. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/21/24 7:59 a.m.

Fuel pump back together with new strainer and pump. Bikes mostly back together and runs. 

Pic of filter part number 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/22/24 9:31 a.m.

Got tail light and turn signal situation better, need to finish my plate mount. Just temporarily down there. 

gearheadE30
gearheadE30 Dork
8/22/24 12:12 p.m.

How is the tire not hitting that pipe?

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/22/24 1:47 p.m.

In reply to gearheadE30 :

I think it's the angle of my picture. It has like half inch clearance. 

gencollon
gencollon Reader
8/23/24 11:44 p.m.
Professor_Brap (Forum Supporter) said:

Traded the SV650 for a 2014 KTM 500exc with a clean title than runs.

Which SV? This might have been a fair trade, or a killer deal! These 2014 bikes are pretty great, and yours has fancy bits everywhere. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/24/24 11:19 a.m.

In reply to gencollon :

1st gen sv650, was using it as a track bike/commuter. Didn't have diddly squat in it.

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
8/29/24 5:52 p.m.
Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
9/3/24 12:29 p.m.

Poor thing. Is naked. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
9/23/24 9:13 a.m.

Ope forgot to post finished pics. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
9/25/24 11:34 a.m.

Clutch cush drive service. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
10/14/24 6:33 p.m.

Oil sample came back excellent. 

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
10/17/24 7:51 p.m.

PO was a little heavy handed 

1 2

You'll need to log in to post.

Our Preferred Partners
XlHFaZzKyGxBN2aUxEUtOjFPitHZ1xR6GDK7pqR6Q3SzoIUp7ERmGy6kZT7T2L6R