Its got the YZF-600R tank and R6 tail conversions so its not as boxy as stock.
RussellH wrote: Dan, what's the new/top bike? Honda ST? Sorry, I'm new to bikes so I can't tell what's what yet.
It's a 2003 Yamaha R1
Dan, are you going to be free on Sunday? I live in Baltimore, I'd like to take a look at the Ninja...
skierd wrote: Dan, are you going to be free on Sunday? I live in Baltimore, I'd like to take a look at the Ninja...
Sent you a message.
1980 Honda CX500. Usually loaded up with hard side bags, rear bag or trunk, and spouse for a weekend gertaway.
KLX250s RM125 before the numbers went on Chinese pitbike (yes, thats my house in the background) CR80 Winter project (among others)
pinchvalve, that looks similar to my '82 450SC in some ways, the tank, the wheels, forks etc. Where do you find parts for it?
Mostly, I pull parts from the other CX500 I have in boxes on the porch :) but anything you want for it can be had on e-bay. The Comstar wheels, the instruments and many other parts are shared with Honda's 4cyl bikes at the time. Only the engine is unique, but it was used in the CX400, CX500, GL500, GL650 and the CX500 turbo so parts are pretty easy to come by.
Not mine, but a good friend has been tinkering on this: The Chupacabra. I think this is version 2.0.
Wait a minute... I would normally assume that thing has a freewheel rear hub, but the lack of brakes suggests otherwise. Looks like a fun way to get your shin bones broken in half :D.
1971 Suzuki Trailhopper.
1973 Suzuki RV90 Van Van
1982 Katana
1979 GS1000S (stock photo)
I have a half dozen other miscellaneous bikes, but my hard drive crashed a while back and I don't have the pictures handy.
Dan G wrote: My first moto-2wheel Still learning, but getting better.
Looks like mine, as your riding gets more aggressive, I would recommend the following...
Hand Guards
Case saver (skid plate)
shark fin (email me if you want one that mounts to the tabs on the swing arm, Would send to you for the price of shipping)
License plate (need baja designs Kit if not in CA)
Here's my '81 CB900F,sold it and replaced with an '01 FZ1 and my wife has an '04 FZ6. http://i117.photobucket.com/albums/o50/kevlarcorolla/100_0771.jpg
http://i117.photobucket.com/albums/o50/kevlarcorolla/100_0773.jpg
http://i117.photobucket.com/albums/o50/kevlarcorolla/DSC00541.jpg
kevlarcorolla wrote: Here's my '81 CB900F,sold it and replaced with an '01 FZ1 and my wife has an '04 FZ6. http://i117.photobucket.com/albums/o50/kevlarcorolla/100_0771.jpg
What kind of swingarm is that on the Honda?
Woody wrote: What kind of swingarm is that on the Honda?
This is gonna make you feel kinda dumb:
http://www.swingarm.com/index.aspx
I heard the turn around time for the JMC swing arms is like waiting for Jesus to return.How long did you have to wait for yours?They sure are pretty.
Here are a few of my bikes:
1966 Honda S65
1964 Yamaha YJ1
1964 Yamaha YG-1T
1964 Bridgestone BS90 Racer
1970 Suzuki AC50
1964 Hodaka ACE 90
1970 Yamaha GT80 Hot Rod
1965 Honda C110 Bonneville Project Bike (follow the bike's at http://saltygarage.blogspot.com/ )
The Line-Up (including the wife's 1962 Honda C100)
Chris H.
I have a project '83 suzuki GS650Gd. Was my dads first bike, but it has been sitting for 15 years when the stator and rec/reg went on it. I still want to resurect it, but after all this time, I'm not sure what it would take to bring her back to life.
I have pics, but I am Epic fail at getting them online. If one of you guys can help me upload them you can see this thing
grinch77 wrote: I heard the turn around time for the JMC swing arms is like waiting for Jesus to return.How long did you have to wait for yours?They sure are pretty.
No idea,I bought the bike like that and only redid a few things.Both the forks and swingarm were 1 off designs just for that bike.
You'll need to log in to post.