1 2 3 4 5 6
vwcorvette (Forum Supporter)
vwcorvette (Forum Supporter) GRM+ Memberand UberDork
6/25/22 9:18 p.m.

We have until the end of July right? Asking for a friend!

Javelin
Javelin GRM+ Memberand MegaDork
6/25/22 9:25 p.m.

In reply to vwcorvette (Forum Supporter) :

Yes! 2 month builds are the new normal.

slowbird
slowbird UltraDork
6/26/22 1:18 a.m.

In reply to Snowdoggie (Forum Supporter) :

That's gonna be awesome.

I would love for the cosworth engine to be re-released or copied by a resin maker or something so I could get a few of them.

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
6/26/22 3:38 p.m.

Time to put the Cosworth engine together...

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
6/26/22 4:09 p.m.

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
6/26/22 4:10 p.m.

slowbird
slowbird UltraDork
6/30/22 11:04 p.m.

I decided to make things harder on myself by opening up the side door. Still no idea how I'm going to mount it. But now the stuff inside should be easier to see.

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/3/22 4:20 p.m.

The Cosworth engine gets a water pump from the other kit.

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/3/22 4:23 p.m.

Then the Cosworth gets a transmission instead of a transaxle.

 

KyAllroad
KyAllroad MegaDork
7/3/22 8:48 p.m.

I don't think I'm doing "model corvette" properly.

vwcorvette (Forum Supporter)
vwcorvette (Forum Supporter) GRM+ Memberand UberDork
7/4/22 7:43 p.m.
KyAllroad said:

I don't think I'm doing "model corvette" properly.

Does it need assembly? Is it plastic? You're good.

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/11/22 7:06 p.m.

Racing seats, Cosworth engine and other parts that will go on the car. 

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/11/22 7:12 p.m.

 

 

Javelin
Javelin GRM+ Memberand MegaDork
7/11/22 7:31 p.m.

In reply to Snowdoggie (Forum Supporter) :

Good therapy! 

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/14/22 5:33 p.m.

More therapy now. You can do a lot of model building in isolation. 

Snowdoggie (Forum Supporter)
Snowdoggie (Forum Supporter) SuperDork
7/14/22 5:35 p.m.

Test fitting the Cosworth Deuce Coupe.

vwcorvette (Forum Supporter)
vwcorvette (Forum Supporter) GRM+ Memberand UberDork
7/15/22 11:29 a.m.

Some small progress. Body needed a lot of clean up. Leaving most of the engine bay in chrome, because show car. 

slowbird
slowbird UltraDork
7/17/22 3:23 p.m.

I'm struggling to make progress. But I got some wheels. These are from an old Revell "Truck Parts" accessory set.

Unfortunately the axle holes aren't quite big enough for this kit's plastic spindles, and the old plastic is a smidge brittle.

Nothing a little superglue can't fix though.

 

I decided to do a custom design slightly similar to the factory one, but with more purple.The silver paint didn't come out great but I'm going to just go with it. I'm waiting a few days for it to maybe stop being so tacky so I can tape it and put purple over the top half. I'm going to cut the stripes to just use the orange and yellow ones since I'm painting the purple.

ddavidv
ddavidv UltimaDork
7/17/22 11:07 p.m.

Most silver sucks unless you gloss coat it. But...sometimes that will make it look mottled. Try in a test piece first.

preach (dudeist priest)
preach (dudeist priest) GRM+ Memberand Dork
7/18/22 4:14 a.m.
Snowdoggie (Forum Supporter) said:

Test fitting the Cosworth Deuce Coupe.

vwcorvette (Forum Supporter)
vwcorvette (Forum Supporter) GRM+ Memberand UberDork
7/25/22 8:49 p.m.

Flame on.

So the flames are not the same side to side. Sorry, I procrastinated. No time to buy a vinyl cutter, learn the software, and print out a mask. Next time. I promise.

Javelin
Javelin GRM+ Memberand MegaDork
7/25/22 8:58 p.m.
vwcorvette (Forum Supporter) said:

Flame on.

So the flames are not the same side to side. Sorry, I procrastinated. No time to buy a vinyl cutter, learn the software, and print out a mask. Next time. I promise.

OMG you're doing the Corvette Summer paint scheme!!! surprise

vwcorvette (Forum Supporter)
vwcorvette (Forum Supporter) GRM+ Memberand UberDork
7/25/22 10:49 p.m.

In reply to Javelin :

Wait? Have you not seen the movie?

AClockworkGarage
AClockworkGarage Dork
7/26/22 12:40 a.m.

With the Sunday deadline looming I decided to clear off my table and try to get this thing finished. 

No pictures but last night I got some work done on the interior.

Looks like its gonna be another last minute slog.

Javelin
Javelin GRM+ Memberand MegaDork
7/26/22 2:46 a.m.
vwcorvette (Forum Supporter) said:

In reply to Javelin :

Wait? Have you not seen the movie?

Of course I have! I love the campy period paint job!

1 2 3 4 5 6

You'll need to log in to post.

Our Preferred Partners
yNvp7IvWvRsXdcKNO2eDkUpAcqqDVKUCNUrKSzKYuKGO4G98eQOdrIEGK7dM1Iew