1 2 3 4 5 6
bravenrace
bravenrace UltimaDork
1/23/14 12:05 p.m.

In reply to Apexcarver:

You are correct. It was a reply I made in haste. And I'll add that the engine block was cast in Canada. My point was that there are no Chinese parts on my car, and I have added no parts not made in the USA. In fact the engine block is the only part of the engine left that wasn't made here. The shocks were on the car when I bought it.
So my statement should have read that there were no Chinese parts on my car, or that I have not added any parts to the car that were not made here. Okay?
But wouldn't our time and efforts be better spent discussing the matter at hand instead of nit picking a side comment?
Edit - I just found out that my engine was actually cast in Cleveland Ohio. But my steering wheel is a vintage Nardi. Made in Italy in the 60's, so there's that.

bravenrace
bravenrace UltimaDork
1/23/14 12:11 p.m.

I'm honestly confused by those here that don't seem to care where something is made. Are you not paying attention to the poor condition our country's economy is in or how in debt we are to the Chinese? Do you know that while they hold vast amounts of our debt, we send them millions in aid every year? Does that make sense to anyone with a brain that is larger than a #2 pencil?
It wasn't that long ago that I shared the same "its a global economy" attitude. It in fact is a global economy. That would be great if we as a country were doing well, but we're not. There are frequent "I need a job" posts on this board. Unemployment is high. Why wouldn't every one of us care about where something is made? Sure, sometimes you have to buy something made in China or somewhere else, but if you have a choice and the product made here is either better or the same price, why wouldn't you take the time to look and buy the American product if you can?

yamaha
yamaha PowerDork
1/23/14 12:20 p.m.

In reply to bravenrace:

Some of the problem is that the retirement age keeps getting higher, also, in the professional sector, we are reaping what was sown with places of higher education proclaiming "We have massive shortages in career field x and career field y" Upon completion, low and behold, there was no shortage of workers. Other times there has been outsourcing, other times there has been industry ending bombs dropped by the treehuggers in the EPA, and some people are too cheap about everything to care.

As far as in my case, if we made the best quality product for even a somewhat reasonable price, yes.....I would buy from here vs. my current worldwide(despite mostly avoiding chinese things) approach.

Swank Force One
Swank Force One MegaDork
1/23/14 12:24 p.m.
bravenrace wrote: I'm honestly confused by those here that don't seem to care where something is made. Are you not paying attention to the poor condition our country's economy is in or how in debt we are to the Chinese? Do you know that while they hold vast amounts of our debt, we send them millions in aid every year? Does that make sense to anyone with a brain that is larger than a #2 pencil? It wasn't that long ago that I shared the same "its a global economy" attitude. It in fact is a global economy. That would be great if we as a country were doing well, but we're not. There are frequent "I need a job" posts on this board. Unemployment is high. Why wouldn't every one of us care about where something is made? Sure, sometimes you have to buy something made in China or somewhere else, but if you have a choice and the product made here is either better or the same price, why wouldn't you take the time to look and buy the American product if you can?

I do that.

I think the confusion is that now i'm not sure what the message is.

Is it "USA everything?"

or "China sucks, anything but them!"

Knurled
Knurled GRM+ Memberand PowerDork
1/23/14 12:26 p.m.

IIRC, pretty much all forged cranks are forged in China. If you machine the blanks in the US then you can say they are "Made in the USA".

bravenrace
bravenrace UltimaDork
1/23/14 12:34 p.m.

In reply to Swank Force One:

What message?

bravenrace
bravenrace UltimaDork
1/23/14 12:39 p.m.

In reply to Knurled:

Same with tools. Matco (when I was there) imported socket blanks from Japan (which at the time was comparable to importing from China now) and did all the machining, heat treating and coating at our plant in Ohio. We couldn't put made in the USA on them, because by law the percentage content wasn't high enough, but we also didn't have to put made in Japan on them.
So yes, many items that say "Made in the USA" aren't fully made in the USA. But its an indicator, and those items have more USA content than those that don't say it as long as the company is being truthfull. The same applies to the content of certain things in foods. "Whole Wheat" doesn't really have to be whole wheat, just a percentage. Same happens with food labelled "organic". But the point is, there are laws governing what is considered made here or not, and something labelled as being made here has more American content than something that is not.

Swank Force One
Swank Force One MegaDork
1/23/14 12:41 p.m.

Well the thread started with "We hate China," and then somewhere in here it came down to "If you don't buy USA, you hate America" or something like that.

There's a big difference there.

For instance, i make it a POINT to try to seek out Taiwan tools because in my budget, they're almost always the best tools i can get. But if USA made stuff is an option at my price point without stepping down in quality (This includes features and finish), i buy it.

I tend to not buy Chinese tools anymore because i don't see them making much in the way of high end tools, that being "Better than the cheapest HF stuff you can find."

I do buy my specialty tools that i'll use maybe twice in my lifetime from HF, and they're usually Chinese.

Ransom
Ransom GRM+ Memberand PowerDork
1/23/14 12:43 p.m.

This is an important topic. I care. I wrote a TL;DR-worthy pile of paragraphs.

Then I deleted them.

How do we get most people to care a little? That will make a much bigger difference than a few gearheads having an entire household-full of items made in the U.S...

bravenrace
bravenrace UltimaDork
1/23/14 1:00 p.m.
Swank Force One wrote: Well the thread started with "We hate China," and then somewhere in here it came down to "If you don't buy USA, you hate America" or something like that. There's a big difference there. For instance, i make it a POINT to try to seek out Taiwan tools because in my budget, they're almost always the best tools i can get. But if USA made stuff is an option at my price point without stepping down in quality (This includes features and finish), i buy it. I tend to not buy Chinese tools anymore because i don't see them making much in the way of high end tools, that being "Better than the cheapest HF stuff you can find." I do buy my specialty tools that i'll use maybe twice in my lifetime from HF, and they're usually Chinese.

You find tools made in Taiwan that are high end?

bravenrace
bravenrace UltimaDork
1/23/14 1:02 p.m.
Ransom wrote: This is an important topic. I care. I wrote a TL;DR-worthy pile of paragraphs. Then I deleted them. How do we get *most* people to care *a little*? That will make a much bigger difference than a few gearheads having an entire household-full of items made in the U.S...

As much as I'd like to think we could, we probably can't. American consumers created this problem in a large way by constantly wanting more for less. There was a time when if you couldn't afford something you didn't buy it, but now people want it all, and don't seem to care as much about the value in high quality products, and that has driven manufacturing overseas. I fear that the only time that will change is when economically we become what China was 20 years ago, and that's the direction we are headed.

EvanB
EvanB GRM+ Memberand PowerDork
1/23/14 1:05 p.m.
bravenrace wrote:
Swank Force One wrote: Well the thread started with "We hate China," and then somewhere in here it came down to "If you don't buy USA, you hate America" or something like that. There's a big difference there. For instance, i make it a POINT to try to seek out Taiwan tools because in my budget, they're almost always the best tools i can get. But if USA made stuff is an option at my price point without stepping down in quality (This includes features and finish), i buy it. I tend to not buy Chinese tools anymore because i don't see them making much in the way of high end tools, that being "Better than the cheapest HF stuff you can find." I do buy my specialty tools that i'll use maybe twice in my lifetime from HF, and they're usually Chinese.
You find tools made in Taiwan that are high end?

Yes, there are a lot of quality tools coming out of Taiwan. Much better than China.

Swank Force One
Swank Force One MegaDork
1/23/14 1:08 p.m.
bravenrace wrote:
Swank Force One wrote: Well the thread started with "We hate China," and then somewhere in here it came down to "If you don't buy USA, you hate America" or something like that. There's a big difference there. For instance, i make it a POINT to try to seek out Taiwan tools because in my budget, they're almost always the best tools i can get. But if USA made stuff is an option at my price point without stepping down in quality (This includes features and finish), i buy it. I tend to not buy Chinese tools anymore because i don't see them making much in the way of high end tools, that being "Better than the cheapest HF stuff you can find." I do buy my specialty tools that i'll use maybe twice in my lifetime from HF, and they're usually Chinese.
You find tools made in Taiwan that are high end?

Considering that many Snap-On, Matco, MAC, most of the Carlyle line, and Toptul, etc etc etc are made in Taiwan...

Is this a trick question?

And again, i said "the best i can get in my budget." That's squarely in Taiwan land.

You know, i believe you and i had this same EXACT discussion probably not even a year ago on this forum. I'll have to find it. I bet it would save everyone a lot of time.

bravenrace
bravenrace UltimaDork
1/23/14 1:11 p.m.

In reply to Swank Force One:

I was just asking. Most of my tools are 30 years old and all of them were made in the USA and warranted for life. I have little need to buy tools these days. Thankfully so it seems.
Edit - I did just look in my tool chest here at work and found that the Armstrong ratchet I bought recently was made in the USA. Now while I am a little out of the loop, I have a lot of experience in the hand tool industry, and am pretty sure if Armstrong is still making hand tools in the USA, Snap-On, Matco and MAC certainly are as well. I live 10 minutes from plant where all Cornwell hand tools are made, so I guess my next question would be can you give me an example of what tools Snap On is making in Taiwan? Are that Snap-On makes, or the typical tools that all pro tool companies outsource?

Swank Force One
Swank Force One MegaDork
1/23/14 1:15 p.m.
bravenrace wrote: In reply to Swank Force One: I was just asking. Most of my tools are 30 years old and all of them were made in the USA and warranted for life. I have little need to buy tools these days. Thankfully so it seems.

Well hopefully they aren't Craftsman, because you won't be getting Made in USA warranty replacements.

Or even if you do, they'll still be crap anyways. I have a select few old Craftsman tools i kept when i got fed up with their crap breaking all the time on me and damn near gave it all away, and they're awesome. But if they break, they're going straight in the trash.

bravenrace
bravenrace UltimaDork
1/23/14 1:16 p.m.

In reply to Swank Force One:

I was making a living with my tools. I didn't buy Craftsman, as they are not and never have been professional quality tools.

Swank Force One
Swank Force One MegaDork
1/23/14 1:23 p.m.
bravenrace wrote: In reply to Swank Force One: I was just asking. Most of my tools are 30 years old and all of them were made in the USA and warranted for life. I have little need to buy tools these days. Thankfully so it seems. Edit - I did just look in my tool chest here at work and found that the Armstrong ratchet I bought recently was made in the USA. Now while I am a little out of the loop, I have a lot of experience in the hand tool industry, and am pretty sure if Armstrong is still making hand tools in the USA, Snap-On, Matco and MAC certainly are as well. I live 10 minutes from plant where all Cornwell hand tools are made, so I guess my next question would be can you give me an example of what tools Snap On is making in Taiwan? Are that Snap-On makes, or the typical tools that all pro tool companies outsource?

It's mostly just the tools they outsource. Regardless, the SnapOn name is on them. Therefor, they're Taiwan SnapOn tools. I'd bet that the bulk, if not all of the Taiwan Truck Tools are outsourced. Doesn't really make a difference to the statement, though.

As for the Armstrong ratchet... Armstrong has at least two "tiers" of tools. The good stuff is made in the USA (Or Taiwan) and in terms of ratchets, are the ones that use the same guts as the new Matco and Gearwrench stuff. I have a 3/8" Armstrong ratchet that i love dearly. This one. It's USA made. Or at least stamped USA made...

It's a bit weird, because it's one of the ones that has guts interchangeable with the Gearwrench ratchets that i also have a ton of (Make up the rest of my ratchet collection currently in use), which.... are Taiwan.

Wayslow
Wayslow Reader
1/23/14 1:35 p.m.

I try to buy products made at home(Canada) but this is impossible with many items. My back up is to find something made in the States or at very least in a first world country. I own a tv that was assembled in the USA, albeit from components mostly made in China. Our washer, dryer, dishwasher and fridge were made in Germany. That being said I'm typing this note on a laptop made in China as are most of you. It's inescapable but we don't have to like it or actively support it.

bravenrace
bravenrace UltimaDork
1/23/14 1:41 p.m.

Well Armstrong is now owned by Danaher, so it makes sense that it has the same guts as Matco. However, a large amount of the expense in a hand tool is in the alloy and heat treatment, and just because the guts are the same dimensionally doesn't mean its the same.
I worked in the test lab at Matco. We tested everything in the industry in the way of hand tools. We also produced some of the Craftsman hand tools at the time. Some of them used guts that were interchangeable to Matco, but they were not made of the same alloys, heat treating, or made to the same dimensionally tolerances as Matco products.
Now, based on your last post I think we have a little bit of a misunderstanding. In our discussion of where tools are made, I was referring mainly to the bread and butter hand tools and you were talking about other tools. Those other tools have always been outsourced, and many times to other countries. Many of those tools are bought by all the major tool companies. It's the tools they make themselves that makes them stand apart from other tool companies, and while I don't really know what the situation is at this point, I would think that those tools - sockets, ratchets, wrenches, extensions, etc.. are still made in the USA. Cornwell is definitely not the leader in pro tools, and if they can make them here profitably I would thinks the others can also. I know Matco makes there tool boxes in Jamestown New York.
But what is a pro tool, and what are pro tool companies? You have pro auto mechanics tools, the market that is dominated by Snap On, Matco, MAC, Cornwell, Proto-Stanely, and then you have industrial where companies like Wright Tool and Dynabrade are stronger. But Craftsman has never been considered a pro tool, even though many technicians use them. I just added this so that you are aware of what my understanding is.

bravenrace
bravenrace UltimaDork
1/23/14 1:45 p.m.
Wayslow wrote: I try to buy products made at home(Canada) but this is impossible with many items. My back up is to find something made in the States or at very least in a first world country. I own a tv that was assembled in the USA, albeit from components mostly made in China. Our washer, dryer, dishwasher and fridge were made in Germany. That being said I'm typing this note on a laptop made in China as are most of you. It's inescapable but we don't have to like it or actively support it.

That's really my point as well. I'm not saying I always buy USA or never buy Chinese products, just that I try to buy USA made products when I can. I also find that they are still in general better quality than comparable products built elsewhere. Because of our tenuous relationship with China, and other things I know about that country, I leave Chinese products as a last resort when it comes to spending my money. I think as an American that just makes sense.

yamaha
yamaha PowerDork
1/23/14 2:25 p.m.

In reply to Swank Force One:

Most likely "Made in USA" is interchangable with "Assembled in USA" in those cases. We sell a lot of snapon products here, and a fair share of it shows up with taiwan/china as the source. The top level hand tools, normally arrive from somewhere in the southern us.

volvoclearinghouse
volvoclearinghouse HalfDork
1/23/14 3:35 p.m.
bravenrace wrote:
Ransom wrote: How do we get *most* people to care *a little*? That will make a much bigger difference than a few gearheads having an entire household-full of items made in the U.S...
As much as I'd like to think we could, we probably can't. American consumers created this problem in a large way by constantly wanting more for less. There was a time when if you couldn't afford something you didn't buy it, but now people want it all, and don't seem to care as much about the value in high quality products, and that has driven manufacturing overseas. I fear that the only time that will change is when economically we become what China was 20 years ago, and that's the direction we are headed.

Unfortunately, I think you've hit the nail on the head. I may have told this story before, but I recently needed a special adjustable C-clamp for a job I was doing. I looked at the ones at Home Depot and they were $20. Then I went to a small indie tool place near me and they had an American-made example (I forget the manufacturer now, but it was one I recognized as American at the time) and that tool was $50. But, I bought it.

Now, it dawned on me that, say, 50 years ago, in inflation-adjusted dollars, that tool was probably $50. Now, however, we all as consumers have this option of buying things for less than half of what they would have cost us back when everything was American made. And not just adjustable C-clamps- radios, televisions, you name it- not only is all this stuff way more advanced than it used to be, but we're buying a multi-CD-player Hi-def Tv blue ray bluetooth blue-whatever super heterodyne thingamawhatchit for way less than what a record player or B&W TV used to run our grandparents. Adjusted for inflation.

Where does this leave us? Well, a lot higher standard of living, on the face of it, and the "choice" to buy American and get (arguably) better quality or buy Chinese and get...more quantity. Unfortunately, the market is speaking, and it's saying that 9 out of 10 Americans talk big but ultimately how they spend their dollars talks bigger.

This same situation gets played out again when it comes to food- we all say we want organically raised, hormone-free, non GMO food, but how many of us go right down the store and plunk down for the 99 cent a pound hamburger (made from God-knows what cow) versus buying real beef from a farmer at 3 or 4 bucks a pound- which is what real beef really costs. The American Consumer speaks volumes when s/he opens his or her wallet: We want it all, and we want it cheap.

This market distortion hides real inflation, in my mind. American consumers might be spending the same % of their income on food, tools, TVs, or whatnot, but if you were able to somehow control for the fact that those things are all much cheaper now due to importation from China, or mass factory farming, or whatever...I bet you'd see people are a LOT worse off than they used to be.

The one market where this actually really shows up is housing. I did some research a while back, and in 1950 the average household income to average home price ratio was 1:1.6. In 2000 that ratio was 1:3. (This is distorted even more when you realize in 1950 most households had one earner, and in 2000 many had two) The reality is, I think, if we were living in the same sort of society as we were in 1950, where tools were made in America, food was farmed naturally, etc, you'd see the ACTUAL cost of the stuff most Americans buy nowadays is about double what it is today. And we're in way, way worse shape than anyone realizes.

yamaha
yamaha PowerDork
1/23/14 3:56 p.m.

In reply to volvoclearinghouse:

Just to touch base on the house thing, have you noticed how much larger homes are getting compared to those from the 1950's?

Mitchell
Mitchell UltraDork
1/23/14 8:04 p.m.
bravenrace wrote: In reply to Swank Force One: I was making a living with my tools. I didn't buy Craftsman, as they are not and never have been professional quality tools.

Would you have bought the same quality of tools if you did not use them to make a living?

My work boots are Red Wings; by far the most expensive pair of shoes that I own. It's more difficult to justify an expense when it does not lead me to making money.

Knurled
Knurled GRM+ Memberand PowerDork
1/23/14 8:52 p.m.
Swank Force One wrote: Considering that many Snap-On, Matco, MAC, most of the Carlyle line, and Toptul, etc etc etc are made in Taiwan... Is this a trick question?

I see a lot of things in the MAC flyers, in the Harbor Freight flyers for a tenth the price or cheaper.

I don't know if they are knockoffs, or they simply never got MAC stickers on them at the factory, or if they are manufacturing "seconds".

1 2 3 4 5 6

You'll need to log in to post.

Our Preferred Partners
gBPzC53L8Jc4gK8dUcZLfT9oaKSVBxctcdSFTKM0eSD4cEBImISVgbIaLhbew7Aq