RevRico
RevRico GRM+ Memberand PowerDork
4/18/20 10:01 a.m.

The upstairs shower, even with a new clear curtain, is dark. Very dark. To solve this, I bought and modified some outdoor safe, motion activated LED lights. 

The reviews are were glowing for shower purposes, even being battery operated. The catch is the backplate that attaches it to a surface. It's setup to be screwed on. Well, the shower is totally tile, including the ceiling. 

I really don't want to drill through and inevitably destroy the tile, but I want to get these mounted.

Is JB weld steam safe? Is there a better adhesive for this job?

it's a 10 foot ceiling, so I'm not really worried about direct water contact.

Mr_Asa
Mr_Asa HalfDork
4/18/20 10:43 a.m.

JB weld or most epoxies should work. 

You could also just go with shower silicone. May be easier to remove and clean off if you ever want to.

You'll need to log in to post.

Our Preferred Partners
83dYhC65Xp4j5PyQaToaVOMkJcdnqZmXkop5Xpd1Ik03F12MhWuWo6tBo4mAntVz