What did you make today?-Page 4| Off-Topic Discussion forum |

T.J. PowerDork
6/15/12 6:19 a.m.

Yesterday, I 'made' 5 instrument information sheets, which are as boring as they sound. (They essentially list the calibration information for new instruments being installed in the plant.) These particular ones are for instrument air, service air, and hydrogen piping systems that are being re-located since they are interferences for the new 13.8kv feed pumps.

Powar Dork
6/15/12 9:40 a.m.

I made my Suburban drive better with a new steering damper, and I made the trailer light connector work with a new ground wire.

Grtechguy PowerDork
6/15/12 10:05 a.m.

Last night: http://grassrootsmotorsports.com/forum/sprockets/garage-door-opener-installed-to-the-bike/50808/page1/

fasted58 UltraDork
6/15/12 10:09 a.m.

puppies

Rufledt Dork
6/15/12 11:59 a.m.

Nothing so far today, but yesterday I made a longbow for my wife.

nocones GRM+ Memberand HalfDork
6/15/12 12:58 p.m.

fritzsch wrote:
turbojunker wrote:
Cole_Trickle wrote:
sobe_death wrote:
RealMiniDriver wrote:
The_Jed wrote: I milled and turned some hydraulic pistons that act as shocks for the front suspension of these trucks.
Berkin' A, I've centerless ground the hinge pins for the dump bed and the pins for the hydraulic rams to lift said bed. 8)
And I worked on the redesign of the hydraulic system for the wheel loaders that put stuff in those trucks.
I helped build the wheel-loader. Actually, Im in logistics, but I go on the floor and put some bolts in with some buddies when I get bored. We build the smaller version of that.
I work on 3516 engines like the wheel loaders have, only stationary and converted to natural gas.
I work on the hydraulics of the large mining trucks. I routed some fluid lines today

I worked to Engineer fluid filters to go into those pieces of equipment today

Ranger50 SuperDork
6/15/12 1:13 p.m.

Cake. Chocolate with chocolate buttercream frosting.

poopshovel PowerDork
6/15/12 1:20 p.m.

"Dear wife,

I love you.

But not enough to write it with icing.

Always,

Ranger50"

Ranger50 SuperDork
6/15/12 1:22 p.m.

poopshovel wrote: "Dear wife, I love you. But not enough to write it with icing. Always, Ranger50"

She don't care. She just wants some cake.

1988RedT2 SuperDork
6/15/12 1:25 p.m.

I put the finishing touches on a pair of "Overnight Sensations" which is a very small 2-way loudspeaker system from Parts Express. Got them for the #1 son for his 9th birthday. He gets the speakers but I had (almost) all the fun putting them together. They look and sound great. The quality of the knock-down cabinets impressed me.

Here's a pic:

jere New Reader
6/15/12 1:50 p.m.

Made an add on craigslist anyone want a treadmill

treadmill $100OBO

pilotbraden Dork
6/15/12 1:59 p.m.

Deliveries, I have made.

93EXCivic UltimaDork
6/15/12 2:09 p.m.

nocones wrote:
fritzsch wrote:
turbojunker wrote:
Cole_Trickle wrote:
sobe_death wrote:
RealMiniDriver wrote:
The_Jed wrote: I milled and turned some hydraulic pistons that act as shocks for the front suspension of these trucks.
Berkin' A, I've centerless ground the hinge pins for the dump bed and the pins for the hydraulic rams to lift said bed. 8)
And I worked on the redesign of the hydraulic system for the wheel loaders that put stuff in those trucks.
I helped build the wheel-loader. Actually, Im in logistics, but I go on the floor and put some bolts in with some buddies when I get bored. We build the smaller version of that.
I work on 3516 engines like the wheel loaders have, only stationary and converted to natural gas.
I work on the hydraulics of the large mining trucks. I routed some fluid lines today
I worked to Engineer fluid filters to go into those pieces of equipment today

Damn how many of us work on those machines?

nocones GRM+ Memberand Dork
6/15/12 2:13 p.m.

Probably all of the disenchanted engineers

Bobzilla SuperDork
6/15/12 2:13 p.m.

the only thing I made today was poo.

93EXCivic UltimaDork
6/15/12 2:16 p.m.

nocones wrote: Probably all of the disenchanted engineers

LOL. I work on proximity detection systems to add on to that equipment.

aussiesmg PowerDork
6/15/12 2:40 p.m.

Mrs Aussie pissed

Secretariata GRM+ Memberand New Reader
6/15/12 9:57 p.m.

My neighbor ask "What are you doing to it now?"

I had the front of my Miata on ramps to change the oil when he came home.

Taiden SuperDork
6/15/12 10:01 p.m.

93EXCivic wrote: Damn how many of us work on those machines?

Classic GRM

MrJoshua PowerDork
6/15/12 10:28 p.m.

I made a 12 year old commercial treadmill with a flawed design work right for the first time in years. Stupid design involved a ground jumper connecting the 2 circuit boards that connected to the two boards with a slide on clip an a jumper wire. Really? An electrical connection on a device that spends its day with fat people jumping on it 100x a minute is relying on a slide on clip? I drilled holes in the boards, redid the jumper spade connectors with ring terminals, and used itty bitty bolts to hold them on. Fat people don't scare me no more!

alex UltraDork
6/15/12 11:50 p.m.

I made a 1986 Shadow run for my brother in law. Then I made my lower back and hip flexors hurt by riding said bike 45 minutes on the highway. Lord, those things are uncomfortable.

aussiesmg PowerDork
6/16/12 9:27 a.m.

I made a 600 Ninja run for my Nephew, then i finished up the Rustang rear suspension for $2012

I made my 200lb goal, woohoo