Currently have a small hub bore, however I have a fixture and mill so I can make them any size. This was the plan to make them fit a Mustang. These have always been track wheels, dirty but no rash.
Offset is either 30 or 40 the one in my office is not marked, I believe one is.
$400 Located in West Michigan.
$1200 a set new in this size, Pro Race 1.2 is the model. NT01 tires on them are good for a track day maybe.
Bugger, if the were 5x108 they'd be sold :(
Adrian_Thompson said:Bugger, if the were 5x108 they'd be sold :(
Yes, to me. 
I can bore the hubs smaller, slotting the lug pattern is possible but I'm not going to go there.
Nohome needs this for his Molvo.
Whats the bore size?
DAMN! I love these wheels, but I can't fit anything lower than a 45 offset under the S2000 without serious work :(
In reply to clutchsmoke :
Bore size is about .100 less than what a Mustang needs, I planned on boring them to fit. I’m a machinist. I can measure them tomorrow, what size do you need?
In reply to sobe_death :
I can make them 45 or more offset, cannot make them less however, that’s what spacers are for.
What size are the tires?
In reply to bobzilla :
255-40-17 NT01
245-45-17 RE71
The yahoo team mates, put different struts on the racecar without adding camber. They have a lot of tread except for the one edge. I planned on these tires mounted backwards on the TD rims for a few track days. But I really don’t need to go there yet.
In reply to clutchsmoke :
Center bore is 2.631, so 2 5/8" or 66.8mm. I planned on boring these to fit my needs and possibly milling the centers to get the offset that I wanted, that can still be done for anyone that wants them. I have access to a decent sized CNC mill for these activities, the bore can be done on a manual mill.
In reply to akylekoz :
PM'ed
Did you find the offset on the other wheel? Any chance you could run a straight edge across the back of the tire and measure down to the back of the hub to give a backspace measurement?
In reply to tr8todd :
6.125 from the edge of the rim to the back of the hub. Rim is 10.125 overall width.
Bump, I still have these.
Is it dumb to want these for my Mazda5 when they will fit on my actual track car?
I have a Mazda 5, would you like me to test fit them?
They stuck way out on the SX4.
In reply to akylekoz :
Yes, yes I would.
These would fit perfectly on the lemons 300zx we are building. Are you willing to ship them without tires?
In reply to Sonic :
That depends, on what motor is in the 300z and what tracks you will be taking it to.
I can grab some free boxes from the tire store and ship them individually.
There may be a van and Datsun heading from my house to PA in the near future.
In reply to Javelin :
That didn’t happen this weekend, I got to put brakes on my Pathfinder instead.
I still have these, just tripped over them in the garage.
Also still trying to get them to Pennsylvania, for Sonic if he still wants them.
You'll need to log in to post.
