misshift (Forum Supporter)
misshift (Forum Supporter) New Reader
12/13/20 3:18 p.m.

Looking for a good used driveshaft. E36 328 manual transmission. DS needs the large flex disc flange at the front used with the ZF 5 spd.   Getrag trans uses the smaller flex disc for 2.5 engines. Swapped out the failed Getrag trans for the beefier ZF used with the 2.8 and M3.  The DS for an E36 chassis M3 might work also.  Part numbers don't cross but length is the same.   DS has 4 bolt flange u-joint in rear. M3 can come with u-joint or CV joint in the rear. I do have spare diff flange to go to CV joint style.  What would also work is just the front section of the DS as long as it's for the larger flex disc and manual trans. 

Anyone have one?

Good salvage yard source North Florida? 

Slippery (Forum Supporter)
Slippery (Forum Supporter) GRM+ Memberand UltraDork
12/13/20 3:20 p.m.

Check Z3s with the ZF as well the front part should work. 

You'll need to log in to post.

Our Preferred Partners
1vbu0GlqGgChaR8kahRuZbjZ3Bwur7oUENyFKoUphb3csCPtIkVQeBBJ5wDzRGz8