1 2
WillG80
WillG80 GRM+ Memberand HalfDork
9/27/24 8:33 a.m.

In reply to 03Panther :

Sorry for my dater info, it's been a while since I looked into them. But I'm still finding them for under $750. 
 

https://www.tascaparts.com/oem-parts/ford-differential-assembly-bc3z4026b

WillG80
WillG80 GRM+ Memberand HalfDork
9/27/24 8:35 a.m.

In reply to 03Panther :

Looking at the car-part site, looks like 2011+ Superdutys. 

WillG80
WillG80 GRM+ Memberand HalfDork
9/27/24 8:39 a.m.

Looks like complete axles with 3.73 and lockers are going for under $500 in my area. Other ratios seem to be more expensive.
 

03Panther
03Panther PowerDork
9/27/24 11:18 a.m.

In reply to WillG80 :

I would have to make a guess that shipping from CO to Lower Alabam' would kinda negate that savings. 
But that picture might help someone out that way. 
You had my hops up, on a $600 e-locker, but alas, that seems to be older information. 
Thanks for the thoughts, though. 
Although I despise doing contracts out of dive hotels, looks like I may need to take the car this fall. 
I imagine any form of 10.5 limited slip/locker is just going to go up in price, but maybe for the spring, I can have Big Red up an hauling. 

mjlogan
mjlogan Reader
9/27/24 3:08 p.m.
gearheadE30 said:

Thanks for all the input.

  •  
  • I didn't realize the Gov Lock was a clutch type diff. All the youtube videos seem to show basically a full lock after they slam into that locked mode.
  •  

 

In my experience they lock up much "tighter" than a typical clutch and spring limited slip.  

I think a G80 should be great for what you're doing.  You'll get used to it and it'll be second nature on how much throttle input to give it and get it to lock up.  I like to 2 foot them.  Drag a little brake, spin it up to the lock point, then keep it on the converter to keep it locked in as I go through the obstacle. 

Most of the bad rap they get is from people that dont understand them 

https://youtu.be/tTGZOJQQBeE?si=Ns5j4xr74ubUuVQ-

gearheadE30
gearheadE30 Dork
9/28/24 9:21 p.m.

No worries on thread jacking, any discussion of traction adders for typical truck stuff instead of hardcore wheeling or sportscar pavement duty is an opportunity for me to learn something.

Definitely not doing one of the ratcheting lockers.

I've considered a winch and I could possibly fit one behind the bumper, but I don't want to have to get the winch out every time I'm teetering between two rocks or lumps in the road or something. Or this weekend, trying to get up a little hill that was greasy on the left tire track and dry on the right. Could make it in 2wd with the right diff, took a sketchy amount of speed and 4 high for me to do it with open diffs.

I'm finding new gov locks for $400-$500 and the truetrac is a bit over $800, that's the final push. I'm getting a gov lock.

 

03Panther
03Panther PowerDork
9/28/24 9:36 p.m.

In reply to gearheadE30 :

Cool. I thought I was on topic, enough, but can also be terribly long winded! And my needs are 2wd and mostly towing, with a ford blush

Recon1342
Recon1342 UltraDork
10/2/24 3:46 p.m.
gearheadE30 said:

No worries on thread jacking, any discussion of traction adders for typical truck stuff instead of hardcore wheeling or sportscar pavement duty is an opportunity for me to learn something.

Definitely not doing one of the ratcheting lockers.

I've considered a winch and I could possibly fit one behind the bumper, but I don't want to have to get the winch out every time I'm teetering between two rocks or lumps in the road or something. Or this weekend, trying to get up a little hill that was greasy on the left tire track and dry on the right. Could make it in 2wd with the right diff, took a sketchy amount of speed and 4 high for me to do it with open diffs.

I'm finding new gov locks for $400-$500 and the truetrac is a bit over $800, that's the final push. I'm getting a gov lock.

 

IIRC, it was the 1/2 ton GM 10-bolt axles that had all the Gov-Bomb complaints. Usually due to stupid drivers or (in my case) a PO that treated the 1500 like a one-ton. Bent axle housings and Gov-locks are a bad combination...

1 2

You'll need to log in to post.

Our Preferred Partners
h883lU5cE87oSsQUkzAE7DQV8nOM2ik4xTEVF2f6HXcTHk1nfuJnNJbfcsHGwS8y