Did something the other day that I’ve wanted to do for a long time, get rid of the useless eyesore seat tray which is mounted to the seat rails and has absolutely zero purpose mounted to the seat frame rail between the seat and the rocker panel molding.. This molded tray was installed on the seat rails before the seat was mounted in the van. So removing these trays was difficult.
Because I never wanted to see this tray even again, I took some metal cutters the only thing I had that would cut this molded plastic piece, then cut away part a small part of the front of this tray then the back of the tray, then popped the retaining pins from within/under the seat rail, slide the forward and back as to jimmy the tray out away from the seat. What a difference and I should have done this sooner.. unseen dirt and some change started collecting under this tray which we could never access till now.
