The all-new Ford Mustang GT3 debuts at Daytona

https://www.youtube.com/embed/Zrr8JPYBM-Q?si=_lxBmLvQwhTbxfiQ

For the first time ever, there’s a Ford Mustang GT3. It will make its race debut in the GTD class during the Rolex 24 at Daytona.

Veteran driver Joey Hand, one of the pilots of the Ford Multimatic Motorsports Ford Mustang in IMSA, shared with us what makes this car special.

Chris Tropea
Chris Tropea Associate Editor
1/26/24 9:32 a.m.

This car sure does look good at speed. 

 

kevinatfms
kevinatfms HalfDork
1/26/24 12:21 p.m.

From what i read it was extremely fast in class? What will BoP do to the car?

Msterbee
Msterbee Reader
1/26/24 4:32 p.m.
kevinatfms said:

From what i read it was extremely fast in class? What will BoP do to the car?

Make it equal-ish.

Msterbee
Msterbee Reader
1/26/24 4:33 p.m.

I am curious why they chose to mount the rear wing supports the way they did (Coming out of the rear window). Why not out of the decklid like pretty much every other car that has a wing?

boulder_dweeb
boulder_dweeb Reader
1/26/24 7:04 p.m.

To Msterbee:

Cause if they get punted, the impact won't take out the wing....(My best guess)

Rog

dean1484
dean1484 GRM+ Memberand MegaDork
1/26/24 7:33 p.m.
Msterbee said:

I am curious why they chose to mount the rear wing supports the way they did (Coming out of the rear window). Why not out of the decklid like pretty much every other car that has a wing?

My bet is they are placing the down force more centered over the rear axle. Possibly reducing the suspension compressions effect on the wing. That mounting point will move less than the far back of the cars deck lid.  
 

It is akin to the games nascar teams played with soft suspensions at super speedways that dropped the rear of the deck lid (and the spoiler) out of the air greatly reducing drag.  This however can make for unpredictable aero effects on the car especially at low speed due that movement changing the angle of attack of a wing. 

j_tso
j_tso Dork
1/26/24 7:38 p.m.

In reply to Msterbee :

I'd guess they wanted the top of the rear clear and wing supports as far away from the underside of the wing as possible.

You'll need to Log in to post comments.

Our Preferred Partners
6K3ZOVwFustEB1oZwHAPgjhYxstRZA0Bt6VxZNFl4byz8c9UomNZhaJ1YIbxR0z3